Foil Assist Motor 6374 150KV Fully Waterproof Brushless Motor for Underwater Thruster Electric SUP Efoil DIY Electric Foil
Foil Assist Motor 6374 150KV Fully Waterproof Brushless Motor for Underwater Thruster Electric SUP Efoil DIY Electric Foil
SKU:MTO6374-150-WPC
Couldn't load pickup availability
Have Doubts? Contact US!!
Have Doubts? Contact US!!
Foil Assist Motor 6374 150KV Fully Waterproof Brushless Motor for Underwater Thruster Electric SUP Efoil DIY Electric Foil
Maytech New Motor/ESC/Remote Kit, easily to convert your non-electric foil, wind foil, kite surf, sup board, wing foil, etc to electric.1. Fully Waterproof 6374 Motor with New Waterproof Treatment Technology on Rotor and Stator.
| Model No. | MTO6374-150-WPC Motor | KV | 150, can be customized, contact us |
| Input Voltage | 3-12S Lipo (12.6V-50V) | Idle Current | 0.8A |
| Max Output Watt | 3550W | Max Current | 65A |
| Shaft | φ8mm, No Output Shaft | Hall Sensor | Without |
| Mounting Hole Pattern | 28mm, 30mm, 44mm Hole distance | Mounting Hole Diameter | M4 |
| Customize | KV, logo, shaft, mounting hole pattern, color, connector, cable, etc., | Bearing | Ceramic bearing, better waterproof |
| Application | Wing foil, wind surf foil, sup foil board, non-electric foil board, kite foil board, underwater thruster, underwater robot, ROV, etc., | ||
Our advanced waterproof technology:
Rotor magnets with anti-oxidation and anti-rust treatment;
Stator with insulation paint;
Coil Copper wires with transparent insulating varnish;
Wataerproof ceramic bearing.
Some other waterproof motors stator and rotor are full filled with black glue. This kind of black glue may expand when motor heats up, it will expand, then distance between the stator and the rotor will be very small. If rotor and stator scraches each other , it will affect the life of the motor.
Moreover, if the rotor and stator are full filled with glue, the motor will heat up more easily and the motor power efficiency is poor.
Our waterproof 6374 motor insulating paint is harder than above normal black glue, and even if there is heat, it will not expand to affect the space between the stator and the rotor. It ensures longer motor life!
2. 100A VESC6 Based ESC
| Model No. | MTSPF60100 | Current | 100A |
| Input Voltage | 3-12S Lipo (12.6V-50V) | Feature | VESC_TOOLCompatible |
| Hardware | VESC6.0 | BEC | 5V |
| Firmware | Updatable | Cooling fin | Final standard ESC will come with cooling fin |
| Application | electric skateboard longboard, fighting robot, e-bike, electric mountainboard, Cable camera, underwater drone, foil assist, surf assist, ROV, etc. | ||
| Model No. | MTSKR1905WF | PCB and Screen Waterproof Rank | IP67 |
| Input Voltage | Max 75V | Signal | PWM (PPM) |
| UART | With TX and RX port to connect VESC controllers | Double Source Power Supply | Accept 5V power by ESC built in BEC or extra 5V power |
| Control Pump | Yes (Relay Switch) on receiver | Control Light | Yes (Transistor Switch) |
| Cruise Control Funtion | With in Esurf Mode | Accessories | Charging Pad; Receiver; 3pcs Dupont Cables |
| Display Screen | Remote & Battery Voltage; Throttle Percentage; Signal Strength; RPM. | ||
| When work with VESC, also display Current; Temp; Volt; Speed&Distance(only for esk8 mode) or RPM (for esurf mode). | |||
