(Limit-time Sale) Maytech MTSKR1905WF V2 New Waterproof Remote Control for Esk8/Esurf with Display and Wireless Charging Functions with Receiver

MTSKR1905WF
  • $109.90
  • Save $73.26


MTSKR1905WF New Waterproof Remote Control for Esk8/Esurf with Display and Wireless Charging Functions with Receiver

MTSKR1905WF PWM signal Range: 
1. Esurf mode: 
Zero position: 1ms;
Throttle button: 1-2ms, max throttle is 2ms; Brake button has no PWM signal output. 
2. Esk8 mode: 
ZERO position: 1.5ms;
Throttle button: 1.5-2ms, max throttle is 2ms; 
Brake button: 1.5-1ms, max brake is 1ms. 

Manual for MTSKR1905WF (click and download)

For extra accessories:
Extra receivers           
Longer antenna         

MTSKR1905WF VS MTSKR1805WF:

Item MTSKR1905WF (V2) MTSKR1805WF (V1)
Waterproof  Fully Waterproof with Nanometers Coating Waterproof
Mode Esk8/Esurf Esk8/Esurf
Display Screen

Remote & Battery Power; Throttle Percentage; Signal Strength;RPM.

Current; Temp; Volt; Speed; Distance

Remote & Battery Power; Throttle Percentage; Signal Strength
Signal PWM, Stronger, not easy to be interfered PWM, sometime easy to be interfered
Double Source Power Supply Accept 5V power by ESC built in BEC or extra 5V power Accept only 5V power by ESC built in BEC
Firmware Updatable Yes No
Control Pump Yes (Relay Switch) No
Control Light Yes (Transistor Switch) No
Set Safety Button Acceptable Yes
Brake Button Yes Yes
Cruise Control Yes Yes
Wireless Charging Yes Yes
Accessories Charging Pad; Receiver; 3pcs Dubang Cables Charging Pad; Receiver

maytech fully waterproof remote controller for electric surfboard skateboard mountainboard long board

Fully waterproof remote for electric skateboard/longboard/robotics/walking robotics/airplane/Esk8/mountainboard/all terrain offroad skateboard/Esurf/Eskate/Efoil/Foilsurf/jetboard/jetski/hydrofoil
Fully waterproof remote for electric skateboard/longboard/robotics/walking robotics/airplane/Esk8/mountainboard/all terrain offroad skateboard/Esurf/Eskate/Efoil/Foilsurf/jetboard/jetski/hydrofoil
Fully waterproof remote for electric skateboard/longboard/robotics/walking robotics/airplane/Esk8/mountainboard/all terrain offroad skateboard/Esurf/Eskate/Efoil/Foilsurf/jetboard/jetski/hydrofoil
Fully waterproof remote for electric skateboard/longboard/robotics/walking robotics/airplane/Esk8/mountainboard/all terrain offroad skateboard/Esurf/Eskate/Efoil/Foilsurf/jetboard/jetski/hydrofoil
Fully waterproof remote for electric skateboard/longboard/robotics/walking robotics/airplane/Esk8/mountainboard/all terrain offroad skateboard/Esurf/Eskate/Efoil/Foilsurf/jetboard/jetski/hydrofoil
Fully waterproof remote for electric skateboard/longboard/robotics/walking robotics/airplane/Esk8/mountainboard/all terrain offroad skateboard/Esurf/Eskate/Efoil/Foilsurf/jetboard/jetski/hydrofoil
Fully waterproof remote for electric skateboard/longboard/robotics/walking robotics/airplane/Esk8/mountainboard/all terrain offroad skateboard/Esurf/Eskate/Efoil/Foilsurf/jetboard/jetski/hydrofoil

Using Notice:

1. Wash the remote in freshwater after using in salt water.
2. The remote PCB is sealed by waterproof nano-coating and double protected by glue. The remote screen is sealed by waterproof nano-coating, not glue. When use it in water, water will get in between the outside and inside screens. It won't influence using. When you don't use it, please put it in dry place and it will dry slowly.
3. When charge the remote, please keep remote dry.
4. Receiver is not waterproof. Please put receiver in dry place.
5. Because each customer using situation is different, some customers may need replace the antenna with longer one . If you mount the reciever deep in your board, recommend to change to a long 2.4ghz antenna and lead the antena near to your top cover of your board for better signal.
6. When soldering, please pay attention that the two pins do not touch each other, otherwise it is easy to burn the receiver.
7. The extended antenna 1m and 3m PCBs are not waterproof.

Go to the following Youtube Links to check the remote test:

1. Motor RPM display by MOTOR WIRE: https://youtu.be/N1IV1dJbil0

2. Motor RPM display by Hall Sensor: https://youtu.be/YBRBzAa-3ww

3. Motor RPM display by VESC: https://youtu.be/qqaZf78ilV4

4. Esk8 mode with speed, current, distance, etc: https://youtu.be/ycFya3Xn7YU

5. Adjust Current mode and Duty cycle mode by remote: https://youtu.be/BPRIhySE7lw

6. Connect to VESC or VESC based Controller: https://youtu.be/sDiAPsg0hWc

7. Remote voltage display for Esk8 and Esurf: https://youtu.be/LZf98XgVwwI

8. Remote can control two switches for Esk8 light and Esurf pump: https://youtu.be/USQHbe3tCOs

9. Receiver wiring with VESC or VESC based controller

(You can select the functions you need and connect them accordingly.)

 MTSKR1905WF fully waterproof remote for electric surfboard efoil foilsurf surfboard jetboard jetski10. Receiver wiring with Maytech 300A ESC MTSF300A-OPTO

(You can select the functions you need and connect them accordingly.)

MTSKR1905WF waterproof remote for electric skateboard longboard connection 6 functions upgraded11. Maytech MTSF300A-OPTO-WP fully waterproof ESC with built-in UBEC and receiver wiring

maytech electric longboard mountainboard offroad skateboard all terrain

Related Products:

Esk8 Products: Brushless Motors, VESC, Truck, Wheels, etc.,

maytech brushless outrunner motors for motorized powered skateboard longboard electric bicycle e-scooter
Esurf Products: Waterproof Motors, ESC, Propeller, etc.,
Electric surfboard products fully waterproof brushless inrunner motor 300A ESC with waterproof case and water-cooling

We Also Recommend