Maytech Electric Longboard VESC Hand Remote 2Pcs VESC100A Speed Controller MTSKR1712 / MTSKR20WFV2 Remote for E-Skateboard

  • $416.60
  • Save $104.15


Maytech Electric Longboard VESC Hand Remote 2Pcs VESC100A Speed Controller MTSKR1712 / MTSKR20WFV2 Remote for E-Skateboard

2 Combs Available:

Comb 1: 2pcs MTVESC100A + 1pcs Canbus cable MTSKC120 +1pcs MTSKR20WFV2 remote
 
Comb 2: 2pcs MTVESC100A + 1pcs Canbus cable MTSKC120 +1pcs MTSKR1712 remote
  • 1. MTVESC100A VESC based controller for Esk8 (2pcs with 1pcs canbus cable) 
Model No. MTVESC100A Cont Current 100A
Input Volt 11.1-50V (3-12S Lipo) Burst Current 280A
Hardware Based on V4 Firmware  Updatable
Software VESC_TOOL Compatible PCB Size 71.5mm x 45.8mm x 18mm
Compatible Motor Sensored & Sensorless Accessory  With USB Cable
BEC 5V / 1.5A Heat Sink With Aluminum Alloy Case
Net Weight 175g FOC No
Electric Switch With  Switch Function Temporary Turn on & off


Features:

With high quality aluminum case, better heat dissipation
Dust‐proof and splash‐proof
Compatible with sensor or sensorless motor
Sensored or Sensorless operation
Great start‐up torque with sensorless motors
Soft‐switching to reduce the losses in power electronic switches
Separation of low power electronics from the high power electronics, make it more reliable.
VESC100A 100A ESC based on VESC speed controller for electric skateboard fighting robots
  •  2.  MTSKR20WFV2 V2 ESK8 Screen Remote  Or MTSKR1712 mini Remote (1pcs)  
Model No. MTSKR20WFV2 Waterproof Rank IP66
Control Mode Esk8 Application Esk8 Only
Speed Display Yes Travel Mileage Yes
Throttle Display ±100% VESC Control Mode Duty Cycle / Current Mode
Speed Mode 3 Speed Modes
Each mode can adjust speed from 1%-100%
Accessories Wireless Charging pad; Receiver; 3pcs Dupont Cable
Charger QC 2.0 Wireless Wireless Frequency 2.4G HZ Wireless with 40 Channels
Display Screen OLED Yellow & Blue Screen Triggers 2x High senstive triggers
Throttle Output 1ms-2ms 100HZ Telemeter Data by Receiver Motor RPM ;
Main battery voltage
Voltage Display Remote & Main battery volt level (Lithium iron; lithium ion battery optional) Telemeter Data by VESC ESC Voltage/ Current/ Temp;
Motor Temp/ RPM
Compatible ESCs  V4/ V6/ Focbox/ Other PWM ESC Receiver Built-in Switch for Esk8 light/ Esurf Water Pump, etc.,  1x 30V 3A mechanical relay switch
1x 20V 2A transistor electronic switch

MTSKR20WFV2 V2 ESK8 Screen Remote for DIY skateboard Compatible with VESC FOCBOX

Model No. MTSKR1712 Application Esk8 Only
Waterproof  Not Waterproof Remote Battery 3.7V 420mAh
Output Power 7dBm Working Current 26mA
Accessories Receiver + USB Charging Cable Speed  High Speed/ Low Speed Shift

 

Maytech new 2.4ghz wireless remote controller with receiver for electric skateboard longboard


      We Also Recommend