News — VESC75300

Notice and Tips for 300A-400A 85V MTSVESC7.5H Speed Controller

Posted by Christina Zhang on

Notice and Tips for 300A-400A 85V MTSVESC7.5H Speed Controller

Introduction:  MTSVESC7.5H is based on 75V 300A VESC hardware and firmware construction. It is mainly used for controlling brushless motor on mobile devices with 20S and below Lipo battery(max 85V, recommend to use 75V and below). Compared with original 75V 300A VESC, it has better heat dissipation and greater continuous power.  Application Fields:  With the many functions and interfaces of VESC, MTSVESC7.5H can be widely used in high-speed electric scooters, high-speed electric karts, electric motorcycles, electric boats,  electric surfboards, heavy-duty cargo robots, fighting robots, and various special vehicles, etc. Notice before usage:  1. If you will use the VESC for water...

Read more →

Updated 200A ESC Based on VESC75300!! MTSVESC7.12

Posted by Christina Zhang on

Updated 200A ESC Based on VESC75300!! MTSVESC7.12

For more Specifications:  https://michobby.com/collections/vesc-based-controllers/products/maytech-new-200a-mtvesc6-12-based-speed-controller-vedder-benjamin-vesc-for-electric-skateboard-mountainbaord Features: High voltage: If use current mode, without brake, max voltage is 60V; If use current mode with brake or duty cycle mode, max voltage is 12S lipo (Max 50.4V). High current: 200A Compatible with brushed and brushless motors, intrunner and outrunner motors Sensored or Sensorless operation + Hybrid mode Adjustable Forward/Backward/Brake Regenerative Braking Function Configurable RPM, Current, Voltage and Power limits Support PPM, Analog (ADC), UART, Canbus input Support BLDC square wave mode control and FOC sine wave mode Communication ports: USB, CAN, UART Throttle curve and ramping for all input sources Seamless 4-quadrant operation...

Read more →