How to Adjust VESC FOC Parameters for Motor - Foil Assist Kit

How to Adjust VESC FOC Parameters for Motor ? - Foil Assist Kit

------------------------------------------------------------------------------------------

How to Adjust VESC FOC Parameters for Motor ? - Foil Assist Kit

Many customers bought the DIY Foil Assist Kit but don't know how to adjust parameters. 

This blog is to show how to adjust MTSPF60100 100A VESC6 parameters according to MTO6374-150-WPC or MTO6374-150-WPC2 Waterproof Motor and MTSKR1905WF remote: 

Before programming, you can download manual and VESC_TOOL software here: 

I. When you first use the MTSKR1905WF remote and receiver, please pair the remote to receiver first:

(for safety, when pair remote to receiver, please disconnect motor or mount motor safely). 

  • 1. Make sure receiver is turned off first.
  • 2. power on remote and enter "pairing" status
  • 3. Turn on receiver, then they will pair to each other automatically.

You can refer to this video: 

II. Adjust the VESC "Motor Settings" and "APP Settings" 

  • Please connect ESC, Motor, Receiver and Battery. 
  • And connect the USB to your computer and open VESC_TOOL software. 
How to Adjust VESC FOC Parameters for Motor - Foil Assist Kit

Please refer video for detailedly programming steps: 

 ------------------------------------------------------------------------

Retour au blog

Laisser un commentaire

Veuillez noter que les commentaires doivent être approuvés avant d'être publiés.