Ir directamente a la información del producto
1 de 8

In Stock! Maytech Dual Motor Electric Skateboard DIY 2Pcs 200A VESC Based Controllers VESC6 Dual ESC With Canbus New V2 Remote

In Stock! Maytech Dual Motor Electric Skateboard DIY 2Pcs 200A VESC Based Controllers VESC6 Dual ESC With Canbus New V2 Remote

SKU:2xMTSVESC6.0+Canbus cable+MTSKR20WFV2

Precio habitual $530.75
Precio habitual $576.90 Precio de oferta $530.75
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.
Remote Option

Have Doubts? Contact US!!

Maytech Dual Motor Electric Skateboard DIY 2Pcs 200A VESC Based Controllers VESC6 Dual ESC With Canbus New V2 Remote

2 Combs Available:

Comb 1: 2pcs MTSVESC6.0 + 1pcs Canbus cable MTSKC120 +1pcs MTSKR20WFV2 remote
 
Comb 2: 2pcs MTSVESC6.0 + 1pcs Canbus cable MTSKC120 +1pcs MTSKR1712 remote
  • 1. MTSVESC6.0 based on VESC6 Speed Controller 200A for Electric Skateboard (2pcs with 1pcs Canbus Cable)
Model No. MTSVESC6.0 Cont Current 200A
Input Volt 11.1-50V (3-12S Lipo) Burst Current 240A
Hardware Based on V6 Firmware  Updatable
Software VESC_TOOL Compatible FOC Yes
Compatible Motor Sensored & Sensorless PCB Size 108mm x 75mm x 27mm
BEC 5V / 1.5A Heat Sink With Aluminum Alloy Case
Net Weight 280g Accessory  With 1pcs Signal Cable + USB Cble
Maytech 200A MTSVESC6.0 based Speed Controller Vedder Benjamin VESC for Electric Skateboard/Mountainbaord
  •  2.  MTSKR20WFV2 V2 ESK8 Screen Remote  Or MTSKR1712 mini Remote (1pcs)  
Model No. MTSKR20WFV2 Waterproof Rank IP66
Control Mode Esk8 Application Esk8 Only
Speed Display Yes Travel Mileage Yes
Throttle Display ±100% VESC Control Mode Duty Cycle / Current Mode
Speed Mode 3 Speed Modes
Each mode can adjust speed from 1%-100%
Accessories Wireless Charging pad; Receiver; 3pcs Dupont Cable
Charger QC 2.0 Wireless Wireless Frequency 2.4G HZ Wireless with 40 Channels
Display Screen OLED Yellow & Blue Screen Triggers 2x High senstive triggers
Throttle Output 1ms-2ms 100HZ Telemeter Data by Receiver Motor RPM ;
Main battery voltage
Voltage Display Remote & Main battery volt level (Lithium iron; lithium ion battery optional) Telemeter Data by VESC ESC Voltage/ Current/ Temp;
Motor Temp/ RPM
Compatible ESCs  V4/ V6/ Focbox/ Other PWM ESC Receiver Built-in Switch for Esk8 light/ Esurf Water Pump, etc.,  1x 30V 3A mechanical relay switch
1x 20V 2A transistor electronic switch

MTSKR20WFV2 V2 ESK8 Screen Remote for DIY skateboard Compatible with VESC FOCBOX

Model No. MTSKR1712 Application Esk8 Only
Waterproof  Not Waterproof Remote Battery 3.7V 420mAh
Output Power 7dBm Working Current 26mA
Accessories Receiver + USB Charging Cable Speed  High Speed/ Low Speed Shift

 

Maytech new 2.4ghz wireless remote controller with receiver for electric skateboard longboard

      Ver todos los detalles