News — Technical Info

How to use the Two Built-in Switches of MTSKR1905WF and MTSKR20WFV2 Remote?

Posted by Christina Zhang on

How to use the Two Built-in Switches of MTSKR1905WF and MTSKR20WFV2 Remote?

The Transistoer switch can be used for LED Light System.  The Relay switch can be used for LED Light System or Water Pump Motor System.  Maytech MTSKR1905WF V2 New Waterproof Remote Control for Esk8/Esurf Maytech MTSKR20WFV2 V2 Remote for Esk8 1. Transistor Switch (MOSFET Switch) -Connect the SWI switch, your LED light and 3S battery as following shows.   -When (Short press Function button three times) transistor switch is on (display of 【2】in Screen Main interface), transistor switch source will be connected to GND and turn on LED. When it’s off(no display of【2】in Screen Main interface), LED is off. 2. Relay Switch...

Read more →

What is the difference between brushless Inrunner and outrunner motor?

Posted by Christina Zhang on

What is the difference between brushless Inrunner and outrunner motor?

Outrunner: The permanent magnets on the outrunner are placed on the rotor and the rotor spins on the outside case. On the inside of the motor are the stator windings which do not rotate, they are fixed in position. For example:  Outrunner Black Sealed Sensored Motors Outrunner Open Cover Sensored Motors Outrunner Sensorless Motors Inrunner: On the outer side of the motor is the case. The case in this situation does not rotate and is fixed. The stator windings are placed on the inside face of the case. When you spin the motor shaft of an inrunner, you are spinning...

Read more →

How to Crimp Terminal Connector to Wire for Maytech 300A Anti-spark Switch

Posted by Christina Zhang on

How to Crimp Terminal Connector to Wire for Maytech 300A Anti-spark Switch

Firstly, you need to prepare below tools to help:  1. Silicone cable that you need to use.  2. Heat shrink tube that is suitable for your cable.  3. Torx screwdriver. 4. Wire cutters to cut the rubber on silicone wires.  5. Terminal hydraulic pliers to crimp terminal connector. Steps: 1. Use torx screwdriver to unscrew the screws and terminal connector on switch.  2. Use wire cutters to cut about 5mm length rubber on silicone wires.  3. Connect the conductive end on the silicone cable to connetion port on terminal connector.  4. Use terminal hydraulic pliers to crimp terminal connector on silicone cable in...

Read more →

FAQ of MTEF20S Complete Efoil Electric Hydrofoil Surfboard Efoil Board 8000W

Posted by Christina Zhang on

FAQ of MTEF20S Complete Efoil Electric Hydrofoil Surfboard Efoil Board 8000W

The price includes shipping cost and taxes. You don't need to pay any extra cost. When package arrives in your country, it will be delivered to door by Fedex.  1.  I would just need to know about the cooling systems (battery, controller(ESC) and the Motor) how do they cool down are there any cooling system. Motor/ESC/battery are with waterproof case and the case touches water directly for cooling. 2. I would like to see a picture and details of the remote and charger if possible please? Here is battery charger picture. and we will attach your country charger adapter. Remote is...

Read more →

Electric Surfboard Boat Kit 120116 Motor/300A ESC/Remote Specfications and Advantages

Posted by Christina Zhang on

Read more →