News — MTSVESC7.12

How to connect Maytech Bluetooth Module MTBLEV12 To Different SUPERFOC or VESC?

Posted by Christina Zhang on

How to connect Maytech Bluetooth Module MTBLEV12 To Different SUPERFOC or VESC?

How to connect Maytech Bluetooth Module MTBLEV12 To Different SUPERFOC or VESC? Maytech bluetooth module MTBLEV1: https://michobby.com/collections/vesc-based-controllers/products/maytech-bluetooth-module-for-communication-with-v4-v6-v75-based-superescs The bluetooth module comes with 8Pin and 7pin 2.0mm JST Connector Sockets:  8mm 2.0mm pitch compatible with Maytech MTSPF7.12 V75/300 VESC7pin 2.0mm pitch compatible with Maytech V4 and V6 based SuperESC) Features:  1. The bluetooth is developed for communication between Maytech SuperESC and VESC_TOOL via BLE, to display parameters on mobile phone, so you can monitor real time parameters on app easily.2. Motor current, duty cycle, ERPM, motor power, motor temperature, battery voltage, battery current, MOS temperature, charging current, charging power, etc., are...

Read more →

Beginner's Guide: How to adjust VESC / Maytech SUPERFOC ESC FOC and BLDC?

Posted by Christina Zhang on

Beginner's Guide: How to adjust VESC / Maytech SUPERFOC ESC FOC and BLDC?

Beginner's Guide: How to adjust VESC / Maytech SUPERFOC ESC FOC and BLDC? Setup FOC Wizard in VESCTOOL. Related products:  VESC based Controllers/Remotes This video will tell you how to set your VESC configuration in VESCTOOL?  Here we use below items as example to run the test: 1. Fully Waterproof Motor 65162 Inrunner Motor 2. Maytech New 200A 70V ESC MTSPF7.12K SUPERCASE200A V75 VESC_TOOL Compatible controller 3. Maytech MTSKR1905WF V2 New Waterproof Remote Control  Detection Steps:  1. Connect your VESC to computer and VESCTOOL 2. Setup Motors FOC in wizard, write in correct battery cells number according to battery you use, choose suitable motor type you...

Read more →

What're differences of ESC and VESC?

Posted by Christina Zhang on

What're differences of ESC and VESC?

Maytech SUPERFOC ESCs based on V4/V6/V75:  https://michobby.com/collections/vesc-based-controllers VESC is more advanced ESC. It's got amazing features. It's one of the latest BLDC ESCs which give you full control over how your ESC operates. Much better than typical RC ESCs. It allows tons of customization. It allows you to control the torque of the board by adjusting the current output to the motor and current input from the battery. It allows you to customize the acceleration and braking curve so that the board behaves exactly as you want it to while braking and accelerating. You can also set some limits to protect your...

Read more →

Updated 200A ESC Based on VESC75300!! MTSVESC7.12

Posted by Christina Zhang on

Updated 200A ESC Based on VESC75300!! MTSVESC7.12

For more Specifications:  https://michobby.com/collections/vesc-based-controllers/products/maytech-new-200a-mtvesc6-12-based-speed-controller-vedder-benjamin-vesc-for-electric-skateboard-mountainbaord Features: High voltage: If use current mode, without brake, max voltage is 60V; If use current mode with brake or duty cycle mode, max voltage is 12S lipo (Max 50.4V). High current: 200A Compatible with brushed and brushless motors, intrunner and outrunner motors Sensored or Sensorless operation + Hybrid mode Adjustable Forward/Backward/Brake Regenerative Braking Function Configurable RPM, Current, Voltage and Power limits Support PPM, Analog (ADC), UART, Canbus input Support BLDC square wave mode control and FOC sine wave mode Communication ports: USB, CAN, UART Throttle curve and ramping for all input sources Seamless 4-quadrant operation...

Read more →