(Motor+ESC+Remote) Electric skateboard longboard kit SUPERFOC6.8 based on VESC6 Speed Controller 50A and Brushless Red cover motor (non-sealed motor) and Remote
(Motor+ESC+Remote) Electric skateboard longboard kit SUPERFOC6.8 based on VESC6 Speed Controller 50A and Brushless Red cover motor (non-sealed motor) and Remote
SKU:MTSUPERFOC6.8 w/o case+MTO5055-220-HA+MTSKR20WFV2
Preço normal
$364.50
Preço normal
$455.60
Preço de saldo
$364.50
Preço unitário
por
Envio calculado na finalização da compra.
Não foi possível carregar a disponibilidade de recolha
Have Doubts? Contact US!!
Have Doubts? Contact US!!
(Motor+ESC+Remote) Electric skateboard longboard kit SUPERFOC6.8 based on VESC6 Speed Controller 50A and Brushless Red cover motor (non-sealed motor) and Remote
Price includes 1pcs ESC and 1pcs motor and 1pcs remote
|
Model No
|
MTSUPERFOC6.8 | Cont Current | 50A |
| Lipo Voltage | 3-12S |
Burst Current
|
240A
|
| BEC | 5V | PCB Size | 40mm*60mm |
| Capatitor | 3pcs 680uf63V | MOS | IRF7530 |
| Hardware | Based on VESC6.0 | Firmware | Updatable |
2. Motor specifications
| Model No. |
MTO5055-220-HA with Hall Sensored |
MTO5065-220-HA With Hall Sensor |
MTO6355-190-HA With Hall Sensor |
MTO6365-200-HA With Hall Sensor |
MTO6374-190-HA With Hall Sensor |
| KV | 220 | 220 | 190 | 200 | 190 |
| Idle Current | 0.5A | 1.2A | 1.0A | 0.8A | 0.8A |
| Max. Current | 30A | 50A | 65A | 65A | 65A |
| Input Volt | 2-10s Lipo | 2-10s Lipo | 2-12s Lipo | 2-12s Lipo | 2-12s Lipo |
| Max. Output Watt | 1170W | 1815W | 3510W | 3520W | 3550W |
| Max. Pull | 5400g | 6700g | 12000g | 9700g | 13000g |
| Rated Current | 25.5A | 42.5A | 55A | 60A | 60A |
| Motor Weight | 335g | 435g | 600g | 745g | 825g |
| Shaft | 6mm | 6mm | 8mm | 8mm | 8mm |
| Output shaft length | 26mm | 26mm | 26mm | 26mm | 26mm |
| Resistance | 0.1022 | 0.0361 | 0.0441 | 0.0402 | 0.0402 |
3. Specification of MTSKR20WFV2 waterproof Remote controller with screen and receiver:
| Model No. | MTSKR2005WF (MTSKR20WFV2) | Waterproof Rank | IP66 |
| Control Mode | New Esk8 | Application | Only for Electric skateboard, elongboard, mountainboard |
| Speed Display | Yes | Travel Mileage | Yes |
| Throttle and brake Display | ±100% | VESC Control Mode | Duty Cycle/ Current Mode |
| Speed Mode |
3 speed modes, each mode can adjust speed from 1%-100% throttle |
Accessories | Wireless charging pad; receiver; 3pcs dupont cable |
| Charger |
QC 2.0 wireless |
Wireless Frequency | 2.4GHz wireless with 40 channels |
| Display Screen |
OLED yellow & blue screen |
Triggers | 2x high senstive triggers |
| Throttle and Brake Signal Output Range |
1.5ms-2ms for throttle; 1.5ms-1ms for brake |
Telemeter Data by Receiver | Motor RPM; main battery voltage |
| Voltage Display |
Remote & main battery voltage level (lithium iron; lithium ion battery optional) |
Telemeter Data by VESC | ESC voltage/ current/ temp; Motor temp/ RPM |
| Compatible ESCs |
VESCTOOL/ Focbox/ Other PWM ESCs that has same signal output range with the remote |
Receiver Built-in Switch for Esk8 Light / Esurf Water Pump |
1x 30V 3A mechanical relay switch; 1x 20V 2A transistor electronic switch |
