Maytech hot combo 6365 brushless motor+VEDDER VESC for electric skateboard

Maytech

  • $204.87
  • Save $36.15


1. Motor specification

a) Maytech water-proof electric skateboards brushless motor 6365 170KV with hall sensor and closed cover

Model NO MTO6365-170-HA-C
Motor KV 200(RPM/V)
Shaft 8mm shaft with 3mm keyway
Idle Curren 0.8A
Max. Current 65A
Input Volt 2-12Lipo cell
Max. Output Watt 3520W
Max. Pull 9700g
Net Weight 668g
Motor Diameter 63mm
Internal Resistance 0.0402
Hall Sensor sensored
Applicaition For electric skateboards/e-bike
Features Waterproof and dustproof function
b)Maytech sensored engine 6365 electric scooter motor for electric skateboard:


Model NO MTO6365-200-HA
Motor KV 200(RPM/V)
Shaft 8mm
Idle Curren 0.8A
Max. Current 65A
Input Volt 2-12Lipo cell
Max. Output Watt 3520W
Max. Pull 9700g
Net Weight 668g
Motor Diameter 63mm
Internal Resistance 0.0402
Features sensored
Applicaition For electric skateboards/e-bike

c)Maytech 6365 220kv brushless outrunner motor for eletric skateboads:

Model NO MTO6365-200-G
Motor KV 200(RPM/V)
Shaft 8mm
Idle Curren 0.8A
Max. Current 65A
Input Volt 2-12Lipo cell
Max. Output Watt 3520W
Max. Pull 9700g
Net Weight 668g
Motor Diameter 63mm
Internal Resistance 0.0402
Features sensorless
Application For electric skateboard/ e-bike

 

2. VESC Specification
Application e-skateboard/E-bike
BEC 5V BEC
Lipo 3-12Cells
Voltage 8V-60V
Accessory with USB cable
Package W/ Box
Capacitors 3pcs 680uf 63V
Dimension of VESC board 60x40mm
Power wire Silicon wire
Connectors 5.5mm Golden Connectors

Maytech VESC Advantages:

  1. The 5.5mm golden connectors are soldered on the VESCs. It costs extra expense and also extra soldering processing method.
  2. Maytech VESCs come with 3pcs pf 680uf 63V capacitors which are soldered on the capacitor PCB. The capacitors are very important for every ESC. They can make sure the ESCs’stability when the ESCs speed up or slow down.

Why do we solder the capacitors on the capacitor PCB?

a)The capacitor PCB can stabilize the 3pcs 680uf 63V capacitors better than those are attached on the cables.

b)The capacitor PCB make the VESC look good and clean.

3. Maytech VESCs come with the USB cables and the sensor cables.

The USB cables are used for programming.

The sensor cables are used for the sensored motors when the original sensor cables on the motors are not compatible with the VESCs.

  1. Maytech uses the genuine Mosfets which come with circles and unclear writing.

However, the substituted Mosfets are with the clear writing and no circles. Many suppliers use the substituted Mosfets because of the lower cost.