In Stock! Esk8 Comb sensored and sensorless 5055 220KV Motor + VESC50A Controller for Electric Skateboard/E-bike

  • $189.00
  • Save $47.30

Esk8 Comb 5055 220KV Motor + VESC50A Controller for Electric Skateboard/E-bike


2 Kits:

Comb 1:

1x MTO5055-220-HA 6mm Shaft Sensored Open Cover Motor + 1x MTVESC50A 4.12 based Electric Speed Controller

Comb 2:

1x MTO5055-220-G 6mm Shaft Sensorless Open Cover Motor + 1x MTVESC50A 4.12 based Electric Speed Controller

5055 220KV brushless motor for electric skateboard

Model NO MTO5055-220-HA
Motor KV 220(RPM/V)
Shaft 6mm
Idle Curren 0.5A
Max. Current 30A
Input Volt 2-10Lipo cell
Max. Output Watt 1170W
Max Pull 5400g
Net Weight 270g
Motor diameter 50mm
Internal Resistance 0.1022
Hall Sensor Sensored/Sensorless


maytech 5055 220kv sensor/sensorless outrunner motor for electric skatebaord/longboard

  • The motors are suitable for the electric skateboards or electric bikes.
  • The up and bottom caps are made of aluminium alloy.
  • The motor case is made of steel.
  • The static balance is confirm.
  • NSK Japanese bearings
  • 45h sintered ndfeb magnets
  • Stator is stacked with silicon steel
  • Use high temperature and oxygen-free copper wire
  • Stainless steel shaft
  • High-temperature micro ball-bearing

2. VESC Specification

Application e-skateboard/E-bike
Lipo 3-12Cells
Voltage 8V-60V
Accessory with USB cable
Package W/ Box
Capacitors 3pcs 680uf 63V
Dimension of VESC board 60x40mm
Power wire Silicon wire
Connectors 5.5mm Golden Connectors


maytech electric skateboard longboard MTVESC50A electric speed controller

Maytech VESC Advantages:

  1. The 5.5mm golden connectors are soldered on the VESCs. It costs extra expense and also extra soldering processing method.
  2. Maytech VESCs come with 3pcs pf 680uf 63V capacitors which are soldered on the capacitor PCB. The capacitors are very important for every ESC. They can make sure the ESCs’stability when the ESCs speed up or slow down.

Why do we solder the capacitors on the capacitor PCB?

a)The capacitor PCB can stabilize the 3pcs 680uf 63V capacitors better than those are attached on the cables.

b)The capacitor PCB make the VESC look good and clean.

3. Maytech VESCs come with the USB cables and the sensor cables.

The USB cables are used for programming.

The sensor cables are used for the sensored motors when the original sensor cables on the motors are not compatible with the VESCs.

We Also Recommend