In Stock! Esk8 Comb 2pcs 6374 170KV Motor+ 2pcs VESC50A Controller Kit for Electric Skateboard/Robotics2xMTO6374-170-HA-C+2xMTVESC50A
Esk8 Comb 2pcs 6374 170KV Motor+ 2pcs VESC50A Controller Kit for Electric Skateboard/Robotics
The Comb Includes:
2x MTO6374-170-HA-C 8mm Shaft Brushless Outrunner Sensored Motor Closed Cover IP54 Splash Waterproof + 2x MTVESC50A 4.12 Electric Speed Controller
Maytech waterproof and dustproof sensored outrunner motor 6374 for electric scooter:
|Input Volt||2-12Lipo cell|
|Max. Output Watt||3550W|
|Application||For electric skateboard/e-bike|
|Features||Waterproof and dustproof|
- The motors are suitable for the electric skateboards or electric bikes.
- The up and bottom caps are made of aluminium alloy.
- The motor case is made of steel.
- The static balance is confirm.
- NSK Japanese bearings
- 45h sintered ndfeb magnets
- Stator is stacked with silicon steel
- Use high temperature and oxygen-free copper wire
- Stainless steel shaft
- High-temperature micro ball-bearing
2. VESC Specification
|Accessory||with USB cable|
|Capacitors||3pcs 680uf 63V|
|Dimension of VESC board||60x40mm|
|Power wire||Silicon wire|
|Connectors||5.5mm Golden Connectors|
Application: Electric skateboard, Esk8, longboard, mountainboard, offroad skateboard, city skateboard, street skateboard, motorized skateboard, electric longboard, electric surfboard, Esurf, Efoil, electric foil, foilsurf, foilsurfing, surffoil, surfjet, jetski, jetboard, electric hydrofoil, etc.,,
operated vehicle, underwater robot, Underwater Robotics/underwater remotely operated vehicles, subsea robots,cablecam, broadcast, IBC2019, Ultra drones,security monitoring robots，robots for security and safety monitoring in harsh terrain, agile robots， autonomous agile robots， security robots， autonomously monitor security, combat robots, fighting robots, etc.,
Maytech VESC Advantages:
- The 5.5mm golden connectors are soldered on the VESCs. It costs extra expense and also extra soldering processing method.
- Maytech VESCs come with 3pcs pf 680uf 63V capacitors which are soldered on the capacitor PCB. The capacitors are very important for every ESC. They can make sure the ESCs’stability when the ESCs speed up or slow down.
Why do we solder the capacitors on the capacitor PCB?
a)The capacitor PCB can stabilize the 3pcs 680uf 63V capacitors better than those are attached on the cables.
b)The capacitor PCB make the VESC look good and clean.
3. Maytech VESCs come with the USB cables and the sensor cables.
The USB cables are used for programming.
The sensor cables are used for the sensored motors when the original sensor cables on the motors are not compatible with the VESCs.
- Maytech uses the genuine Mosfets which come with circles and unclear writing.
However, the substituted Mosfets are with the clear writing and no circles. Many suppliers use the substituted Mosfets because of the lower cost.
We Also Recommend
Double kingpin truck Dual 5065 sensored motors Superfoc 50A VESC6 based ESC V2 Screen Remote electric longboard kit
Double kingpin truck Dual 6374 sensored motors Superfoc 50A VESC6 based ESC V2 Screen Remote electric skateboard longboard kit
In Stock! Double kingpin truck Dual 6374 sensored motors VESC6.0 200A VESC6 based ESC V2 Screen Remote electric skateboard longboard kit
In Stock! Maytech electric mountainboard kit offroad skateboard trucks, wheels, pulleys, belts