Esk8 Comb 6365 170KV Motor+VESC50A Controller for Electric Skateboard/Fighting Robots

MICHOBBY.COM

  • $209.44
  • Save $54.54


Esk8 Comb 6365 170KV Motor+VESC50A Controller for Electric Skateboard/Fighting Robots

2 Kits:

Comb 1:

1x MTO6365-170-HA-C 8mm Shaft Brushless Outrunner Sensored Motor with Closed Cover + 1x MTVESC50A VESC4.12 Based Speed Controller

Comb 2: 

1x MTO6365-170-HA-C2 10mm Shaft Brushless Outrunner Sensored Motor with Closed Cover + 1x MTVESC50A VESC4.12 Based Speed Controller

 

a) Maytech water-proof electric skateboards brushless motor 6365 170KV with hall sensor and closed cover for electric mountainboard

Model NO MTO6365-170-HA-C2
Motor KV 200(RPM/V)
Shaft 10 mm shaft.output shaft length 34mm
Idle Curren 0.8A
Max. Current 65A
Input Volt 2-12Lipo cell
Max. Output Watt 3520W
Max. Pull 9700g
Net Weight 765g
Motor Diameter 63mm
Internal Resistance 0.0402
Hall Sensor sensored
Applicaition For electric skateboards/e-bike
Features Waterproof and dustproof function


maytech 6365 170KV outrunner brushless motor engine for electric skateboard longboard all terrain offroad Esk8 Eskate

b) Maytech electric skateboards brushless motor 6365 170KV with hall sensor and closed cover for diy electric skateboard


Model NO MTO6365-170-HA-C
Motor KV 200(RPM/V)
Shaft 8mm shaft with 3mm keyway
Idle Curren 0.8A
Max. Current 65A
Input Volt 2-12Lipo cell
Max. Output Watt 3520W
Max. Pull 9700g
Net Weight 668g
Motor Diameter 63mm
Internal Resistance 0.0402
Hall Sensor sensored
Applicaition For electric skateboards/e-bike
Features Waterproof and dustproof function

 

2. VESC Specification
Application e-skateboard/E-bike
BEC 5V BEC
Lipo 3-12Cells
Voltage 8V-60V
Accessory with USB cable
Package W/ Box
Capacitors 3pcs 680uf 63V
Dimension of VESC board 60x40mm
Power wire Silicon wire
Connectors 5.5mm Golden Connectors

 

maytech electric speed controller vesc50a based controller VESC4.12 firmware for Esk8

Application: Electric skateboard, Esk8, longboard, mountainboard, offroad skateboard, city skateboard, street skateboard, motorized skateboard, electric longboard, electric surfboard, Esurf, Efoil, electric foil, foilsurf, foilsurfing, surffoil, surfjet, jetski, jetboard, electric hydrofoil, etc.,,

ROV/ROVEEE/remote
operated vehicle, underwater robot, Underwater Robotics/underwater remotely operated vehicles, subsea robots,cablecam, broadcast, IBC2019, Ultra drones,security monitoring robots,robots for security and safety monitoring in harsh terrain, agile robots, autonomous agile robots, security robots, autonomously monitor security, combat robots, fighting robots, etc.,

Maytech VESC Advantages:

  1. The 5.5mm golden connectors are soldered on the VESCs. It costs extra expense and also extra soldering processing method.
  2. Maytech VESCs come with 3pcs pf 680uf 63V capacitors which are soldered on the capacitor PCB. The capacitors are very important for every ESC. They can make sure the ESCs’stability when the ESCs speed up or slow down.

Why do we solder the capacitors on the capacitor PCB?

a)The capacitor PCB can stabilize the 3pcs 680uf 63V capacitors better than those are attached on the cables.

b)The capacitor PCB make the VESC look good and clean.

3. Maytech VESCs come with the USB cables and the sensor cables.

The USB cables are used for programming.

The sensor cables are used for the sensored motors when the original sensor cables on the motors are not compatible with the VESCs.

  1. Maytech uses the genuine Mosfets which come with circles and unclear writing.

However, the substituted Mosfets are with the clear writing and no circles. Many suppliers use the substituted Mosfets because of the lower cost.


We Also Recommend