(Buy 2 Get 1) Buy 70mm 60KV Hub Motor and Superfoc6.8 ESC, Get Free Bluetooth Module

MTO7052HBM-60-HA+MTSPF6.8+MTBLTV1
  • $269.50
  • Save $67.38


(Buy 2 Get 1) Buy 70mm 60KV Hub Motor and Superfoc6.8 ESC, Get Free Bluetooth Module 

(Buy 1pcs hub motor and 1pcs Superfoc6.8, get 1pcs free bluetooth Module). 

1. Specifictions of MTO7052HBM-60-HA 70mm electric skateboard hub motor for electric skateboards longboard delivery robot agricultural robots:

KV 60
Motor w/wheel dimension 70x50mm
Hole Size 8mm
Idle Current

0.5A

Max Current

22A

Input Volt

12-42V

Max Output Watt

500W

Color

Red

Motor Weight

615g

Internal Resistance

0.557-0.577

Hall Sensor With hall sensor 
Construction 24N28P

 

2. MTSPF6.8 Superfoc6.8 50A Speed controller VESC_TOOl Compatible

Model No
MTSPF6.8 SUPERFOC6.8 Cont Current 50A
Lipo Voltage 3-12S
Burst Current
240A
BEC 5V PCB Size 40mm*60mm
Capatitor 3pcs 680uf63V MOS IRF7530
Hardware Based on V6.0 Firmware

Updatable

 

3. MTBLEV1 Bluetooth Module for communication with V4 V6 V75 Based SuperESCs

Specfication:
Model numbe: MTBLEV1
Input volt.: 3.3-24V
Distance: 15meters
Compatible: V4&V6&V75
Compatible:VESCTOOL App
Frequency: 2.4Ghz
PCB:41x21mm
Weight: 5.0g
Antenna Length: 90mm
ARM Cortex-M0 32 bit processor
256kB flash&16kB RAM
With 8Pin and 7pin 2.0mm JST Connector Sockets
Application: Electric skateboard, electric longboard, motorized mountainboard
Diaplay: Voltage, current, temperature , etc.

Please noted:
Actual product you receive might be a little different from the picture, please subject to the actual product you receive.

Discription:
1. The bluetooth is developed for communication between Maytech SuperESC and VESC_TOOL via BLE, to display parameters on mobile phone, so you can monitor real time parameters on app easily.
2. Motor current, duty cycle, ERPM, motor power, motor temperature, battery voltage, battery current, MOS temperature, charging current, charging power, etc., are able to display through the bluetooth module.
3. You can adjust parameters for motor settings, Including General, BLDC, FOC, PID controllers, etc informations.
4. It supports V4 V6 V75 Based SuperESCs hardware, please choose the correct hardware version of your VESC, we will match compatible cable for you.
5. Firmware is updatable.

 

New Updated 70mm Hub Motor Advantages:
1. Support 12-42V voltage;
2. With Hall Sensor, detect the position of the rotor, large starting torque, can start and turn back and forth frequently, high operation accuracy and smooth start.
3. Magnet is 52H, strong magnetism, glued with Loctite, high speed response, high starting torque, saving electricity;
4. Silicon steel sheet is Low power consumption , high efficiency, high magnetic induction, basically no magnetic aging;
5. Motor cable is 16AWG soft silicon cable, high temp and low temp resistance, environmentally friendly silicone rubber material for insulation, soft and great fire resistance;
6. Connector is AMASS 4mm male connector, increased contact surface area, can connect and insert more current, gold-plated surface, anti-oxidation, long service life;
7. Updated with Temerature Sensor;
9. Hall sensor connector is 6pin JST PH 2.0mm Pitch, compatible with standard VESC hall sensor.n their appearance.

MTO7052HBM-60-HA Maytech 70mm 60KV Hub motor 500W For electric skateboard Longboard Robots E-bike

MTO7052HBM-60-HA 70mm electric skateboard hub motor for electric skateboards longboard delivery robot agricultural robots

MTO7052HBM-60-HA 70mm electric skateboard hub motor for electric skateboards longboard delivery robot agricultural robots

Suitable trucks for hub motors:

Maytech double hub motor truck for diy electric longboard


We Also Recommend