(Pro Kit) Efoil DIY Foil Assist Kit ( 6579 110KV Waterproof Motor +160A Fully Waterproof ESC + MTSKR1905WF Waterproof Remote )
(Pro Kit) Efoil DIY Foil Assist Kit ( 6579 110KV Waterproof Motor +160A Fully Waterproof ESC + MTSKR1905WF Waterproof Remote )
SKU:MTO6579-110-WPC+MTSF160A-WP32+Progcard32+MTSKR1905WF+MICP27F+MTLB8S3P+MTBC3305P
Have Doubts? Contact US!!
Have Doubts? Contact US!!
Because Shipping has regulation on Battery. If you order the kit including 8S3P or 10S3P battery, after you placing order, we will check and contact you to pay shipping cost for battery separately.
Or you can contact us by messenger or email (support@michobby.com) to check battery shipping cost and shipping time before order.
24-48V Efoil DIY Foil Assist Kit ( 6579 110KV Waterproof Motor +160A Fully Waterproof ESC + MTSKR1905WF Waterproof Remote )
Please check and download clear test files by following links:
>>Check Test Data of 6579 Motor with Plastic Propeller (Max 28KG Thrust)
>>Check Test Data of 6579 Motor with Stainless Steel Propeller (Max 41KG Thrust)
1. Fully Waterproof 6579 110KV Motor with New Waterproof Treatment Technology on Rotor and Stator.
MTO6579-110-WPC 6579 Outrunner Motor
Waterproof Rating: IP68 Fully Waterproof (can be immersed in water)
Motor KV: 110 (RPM/V) KV can be customized.
Shaft: No output shaft
Max. Current: 150A
Input Volt: 20-90V
Max. Output Watt: 7.5KW
Max Torque 6.1N.M
Motor size: 65x79 mm (please subject to drawing)
Motor next weight: about 1.1kg
Motor structure: 24N/20P
Bearing: Ceramic bearings
Wire length: about 1meter
Cable Guage: 3x 10AWG
Connector: 3x 8.0mm golden connectors
Without Hall Sensor
Application: For Wing foil, wind surf foil, sup foil board, electric foil board, kite foil board, underwater thruster, underwater robot, ROV, Electric Kayaks, etc.
Update from 12 Sept, 2024:
The motor shaft doesn't have washers and c-clip. It's for customers easier disassembling and cleaning motor after each using.
And when mount the motor on efoil, the motor rotor backside propeller will push motor forward, so the rotor won't loose in using.
Our advanced waterproof technology:
Rotor magnets with anti-oxidation and anti-rust treatment;
Stator with insulation paint;
Coil Copper wires with transparent insulating varnish;
Ceramic bearings.
2. Maytech New 32Bit 160A ESC Waterproof Speed Controller (Non-VESC) With UBEC and Progcard
Higher power and more easier to be programmed.
Model No. | MTSKR1905WF | PCB and Screen Waterproof Rank | IP67 |
Input Voltage | Max 75V | Signal | PWM (PPM) |
UART | With TX and RX port to connect VESC controllers | Double Source Power Supply | Accept 5V power by ESC built in BEC or extra 5V power |
Control Pump | Yes (Relay Switch) on receiver | Control Light | Yes (Transistor Switch) |
Cruise Control Funtion | With in SF (Surfboard) Mode | Accessories | Charging Pad; Receiver; 3pcs Dupont Cables |
Display Screen | Remote & Battery Voltage; Throttle Percentage; Signal Strength; RPM. | ||
When work with VESC, also display Current; Temp; Volt; Speed&Distance(only for esk8 mode) or RPM (for esurf mode). |
4. Plastic Propeller or Stainless Steel Propeller
(1). MICHOBBY MICP27F 3D Printed Plastic (nylon) folding propeller
Material: Nylon Powder
Color: Black
Mounting Holes: 8xM4
Max Rotation Diameter: 165mm/6.5'' (Approx.)
Height: 32mm/1.25'' (Approx.)
Blade Material: 316L Stainless Steel
Color: Black
Mounting Holes: 8xM4
Max Rotation Diameter: 165mm/6.5'' (Approx.)
Height: 32mm/1.25'' (Approx.)
5. 8S3P battery or 10S3P battery with charger
(Each batch battery Lenth/Width/Height will have 1-3cm tolerance. Please subject to actual product you receive. Also each batch charger outlook may have some difference. Please note before order).
- MTLB8S3P lithium-ion 8S3P Battery Pack
with Molicel 21700 cells
Rated: 29.6V
Full charged: 33.6V
Capacity: 12.6Ah
with BMS
MTBC3305P Battery Charger
AC: 220V 50Hz
DC: 33.6V 5A
- MTLB10S3P lithium-ion 10S3P Battery Pack
with Molicel 21700 cells
Rated: 37V
Full charged: 42V
Capacity: 12.6Ah
with BMS
MTBC4250P Battery Charger
AC: 220V 50Hz
DC: 42V 5A