How to find a professional low-cost electric DIY eFoil surfboard kit
We supply fully waterproof remote/motors/ESCs to meet different people need on their efoils, surfboards, jetski, boats, etc.
1. Wireless Remote Controller:
- IP rating: IP67
- Throttle trigger and Brake trigger
- Sensor Type: Non-contact Hall sensor
- Two control modes: ESK8 mode-Trottle and Brake; Esurf mode-Throttle and Cruise speed control, No Brake
- Display: 128x64 OLED, yellow and blue screen, easy to view remote battery and main battery voltage
- Battery: 3.7V/420mA, Full-charged working time more than 2 hours
- Charge interface: QI standard wireless charging interface
- Transmission distance: Air 10M; Water 1M
- Throttle signal output: 1-2ms 50Hz PWM 5V Max
- Voltage detection range: 5-80V ±5%
- Standard PWM signal output, can be used in electric surfboards, electric skateboards, rc cars, rc boats, rc airplanes, robotics, etc., can also be customized for 4-20ma signal output for industrial applications.
- Easy pairing remote and receiver;
- Automatic memory of code pairs (it doesn't need to pair again in next time using);
- Fast response;
- Auto throttle shut down in signal lose situation;
- With free accessory (floating belt)
- Direct drive, no need gearbox, more reliable
- First-hand and high quality components:
- High power/efficiency
- The static balance is confirm.
- NSK Japanese bearings
- Magnets is N45SH sintered ndfeb magnet
- Use high temperature and oxygen-free copper wire
- Stainless steel shaft
- High-temperature micro ball-bearing
- Fully waterproof Version IP68 rating (65162/85165/120116)
- Waterproof and watercooled motor with build-in temperature sensor(85165 and 120116 motor)
- High performance brushless motors reduce noise and vibration, enabling smooth control while, improve the stability and performance of electric surfboard/efoils, etc, and simplify maintenance, extending its lifetime.
- First-hand and high quality components imported from Japan and United States
- PCB: Glass fiber in the middle of copper plating on the top and bottom, thick copper layer, greatconductivity and heat dissipation, pad with gold plating, anti-oxidation, fast heat dissipation and high temperature resistance.
- Imported MOS tube from Japan and United States, brand: IR, Toshiba, AO. Small internal resistance, short switching time.
- Imported MCU from ATMEL, SILAB, ARM. Fast responding.
- Imported Capacitor from Japanese Red Rubbyson, high frequency capacitor, quick charge and discharge, current output equalization.
- Motor wires and power wires: silicon cables, insulation and high temperature resistance.
- Parameters can be adjusted by PC or progcard to maximize motor performance:
- Extremely low internal resistance
- Super smooth and accurate throttle linearity
- With water cooling system and waterproof function
- Supports high RPM motors
- New Advanced programming software
- Low voltage protection
- Keep battery cooler and longer surfing time