(Motor+ESC+Remote) electric skateboard mountainboard kit MTSVESC6.0 200A VESC based ESC and brushless Red cover motor (non-sealed motor) and Remote
(Motor+ESC+Remote) electric skateboard mountainboard kit MTSVESC6.0 200A VESC based ESC and brushless Red cover motor (non-sealed motor) and Remote
SKU:MTSVESC6.0+MTO6355-190-HA+MTSKR20WFV2
Prezzo di listino
$475.60
Prezzo di listino
$594.50
Prezzo scontato
$475.60
Prezzo unitario
per
Spese di spedizione calcolate al check-out.
Impossibile caricare la disponibilità di ritiro
Have Doubts? Contact US!!
Have Doubts? Contact US!!
(Motor+ESC+Remote) electric skateboard mountainboard kit MTSVESC6.0 200A VESC based ESC and brushless Red cover motor (non-sealed motor) and Remote
Price includes 1pcs ESC and 1pcs motor and 1pcs remote
| Application | electric skateboard longboard/fighting robots combat robots/elctric surfboard |
| BEC | 5V/1.5A |
| Lipo | 3-12Cells |
| Voltage | 8V-60V |
| Hardware version | based on VESC6.0 |
| Firmware version | updatable |
| Cont. Current | 200A |
| Burst Current | 280A |
| Capacitors | With high quality aluminum case, better heat dissipation |
| Case Size | 108mm(L)x75mm(W)x27mm(H) |
| Power wire | Silicon wire |
| Model No. | MTO6355-190-HA | MTO6365-200-HA | MTO6374-190-HA |
| With Hall Sensor | With Hall Sensor | With Hall Sensor | |
| KV | 190 | 200 | 190 |
| Idle Current | 1.0A | 0.8A | 0.8A |
| Max. Current | 65A | 65A | 65A |
| Input Volt | 2-12s Lipo | 2-12s Lipo | 2-12s Lipo |
| Max. Output Watt | 3510W | 3520W | 3550W |
| Max. Pull | 12000g | 9700g | 13000g |
| Rated Current | 55A | 60A | 60A |
| Motor Weight | 600g | 745g | 825g |
| Shaft | 8mm | 8mm | 8mm |
| Output shaft length | 26mm | 26mm | 26mm |
| Resistance | 0.0441 | 0.0402 | 0.0402 |
3. Specification of MTSKR20WFV2 waterproof Remote controller with screen and receiver:
| Model No. | MTSKR2005WF (MTSKR20WFV2) | Waterproof Rank | IP66 |
| Control Mode | New Esk8 | Application | Only for Electric skateboard, elongboard, mountainboard |
| Speed Display | Yes | Travel Mileage | Yes |
| Throttle and brake Display | ±100% | VESC Control Mode | Duty Cycle/ Current Mode |
| Speed Mode |
3 speed modes, each mode can adjust speed from 1%-100% throttle |
Accessories | Wireless charging pad; receiver; 3pcs dupont cable |
| Charger |
QC 2.0 wireless |
Wireless Frequency | 2.4GHz wireless with 40 channels |
| Display Screen |
OLED yellow & blue screen |
Triggers | 2x high senstive triggers |
| Throttle and Brake Signal Output Range |
1.5ms-2ms for throttle; 1.5ms-1ms for brake |
Telemeter Data by Receiver | Motor RPM; main battery voltage |
| Voltage Display |
Remote & main battery voltage level (lithium iron; lithium ion battery optional) |
Telemeter Data by VESC | ESC voltage/ current/ temp; Motor temp/ RPM |
| Compatible ESCs |
VESCTOOL/ Focbox/ Other PWM ESCs that has same signal output range with the remote |
Receiver Built-in Switch for Esk8 Light / Esurf Water Pump |
1x 30V 3A mechanical relay switch; 1x 20V 2A transistor electronic switch |
MTSVESC6.0
