(Motor+ESC+Remote) DIY Electric skateboard longboard kit SUPERFOC6.8 based on VESC6 Speed Controller 50A and brushless black sealed motor (battle-hardened) and Remote

(Motor+ESC+Remote) DIY Electric skateboard longboard kit SUPERFOC6.8 based on VESC6 Speed Controller 50A and brushless black sealed motor (battle-hardened) and Remote

Price includes 1pcs ESC and 1pcs motor and 1pcs remote

1. Superfoc6.8 specifications:

Model No	MTSUPERFOC6.8	Cont Current	50A
Lipo Voltage	3-12S	Burst Current	240A
BEC	5V	PCB Size	40mm*60mm
Capatitor	3pcs 680uf63V	MOS	IRF7530
Hardware	Based on VESC6.0	Firmware	Updatable

 2. Motor specifications:

First Generation Maytech sealed cover HALL SENSOR Motor

Model No.	MTO5065-170-HA-C	MTO6355-170-HA-C	MTO6365-170-HA-C	MTO6374-170-HA-C
KV	170	170	170	170
Idle Current	1.2A	1.0A	0.8A	0.8A
Max. Current	50A	65A	65A	65A
Input Volt	2-10s Lipo	2-12s Lipo	2-12s Lipo	2-12s Lipo
Max. Output Watt	1815W	3510W	3520W	3550W
Max. Pull	6700g	12000g	9700g	13000g
Rated Current	42.5A	55A	60A	60A
Motor Weight	450g	605g	760g	830g
Shaft	8mm	8mm	8mm	8mm
Output shaft length	26mm	26mm	26mm	26mm
Resistance	0.0361	0.0441	0.0402	0.0402

Second Generation Maytech sealed cover HALL SENSOR Motor

Model No.	MTO6355-170-HA-C2	MTO6365-170-HA-C2	MTO6374-170-HA-C2
KV	170	170	170
Idle Current	1.0A	0.8A	0.8A
Max. Current	65A	65A	65A
Input Volt	2-12s Lipo	2-12s Lipo	2-12s Lipo
Max. Output Watt	3510W	3520W	3550W
Max. Pull	12000g	9700g	13000g
Rated Current	55A	60A	60A
Motor Weight	610g	765g	860g
Shaft	10mm	10mm	10mm
Output shaft length	34mm	34mm	34mm
Resistance	0.0441	0.0402	0.0402

Third Generation Maytech sealed cover HALL SENSOR Motor with extra big bearing (more durable)

Model No.	MTO5570-190-HA-C3	MTO6880-190-HA-C3
KV	190	190
Idle Current	1.2A	0.8A
Max. Current	50A	65A
Input Volt	2-10s Lipo	2-12S Lipo
Max. Output Watt	1815W	3550W
Max. Pull	6700g	13000g
Rated Current	42.5A	60A
Motor Weight	660g	1200g
Shaft	8mm	10mm
Output shaft length	45.5mm	45.5mm
Resistance	0.0361	0.0402

3. Specification of MTSKR20WFV2 waterproof Remote controller with screen and receiver:

Model No.	MTSKR2005WF (MTSKR20WFV2)	Waterproof Rank	IP66
Control Mode	New Esk8	Application	Only for Electric skateboard, elongboard, mountainboard
Speed Display	Yes	Travel Mileage	Yes
Throttle and brake  Display	±100%	VESC Control Mode	Duty Cycle/ Current Mode
Speed Mode	3 speed modes, each mode can adjust speed from 1%-100% throttle	Accessories	Wireless charging pad; receiver; 3pcs dupont cable
Charger	QC 2.0 wireless	Wireless Frequency	2.4GHz wireless with 40 channels
Display Screen	OLED yellow & blue screen	Triggers	2x high senstive triggers
Throttle and Brake Signal Output Range	1.5ms-2ms for throttle; 1.5ms-1ms for brake	Telemeter Data by Receiver	Motor RPM; main battery voltage
Voltage Display	Remote & main battery voltage level (lithium iron; lithium ion battery optional)	Telemeter Data by VESC	ESC voltage/ current/ temp; Motor temp/ RPM
Compatible ESCs	VESCTOOL/ Focbox/ Other PWM ESCs that has same signal output range with the remote	Receiver Built-in Switch for Esk8 Light / Esurf Water Pump	1x 30V 3A mechanical relay switch;  1x 20V 2A transistor electronic switch