In Stock! Electric Skateboard Comb 2pcs 6355 170KV Motor+2pcs VESC50A Brushless Motor and VESC Comb
In Stock! Electric Skateboard Comb 2pcs 6355 170KV Motor+2pcs VESC50A Brushless Motor and VESC Comb
SKU:2xMTO6355-170-HA-C+2xMTVESC50A
Have Doubts? Contact US!!
Have Doubts? Contact US!!
Electric Skateboard Comb 2pcs 6355 170KV Motor+2pcs VESC50A Brushless Motor and VESC Comb
Model NO | MTO6355-170-HA-C |
Motor KV | 170(RPM/V) |
Shaft | 8mm |
Idle Curren | 1.0A |
Max. Current | 65A |
Input Volt | 2-12Lipo cell |
Max. Output Watt | 3510W |
Max. Pull | 12000g |
Net Weight | 522g |
Motor Diameter | 63mm |
Internal Resistance | 0.0441 |
Hall Sensor | with hall sensor |
Feature |
with dustproof and waterproof function |
2. VESC Specification
Application | e-skateboard/E-bike |
BEC | 5V BEC |
Lipo | 3-12Cells |
Voltage | 8V-60V |
Accessory | with USB cable |
Package | W/ Box |
Capacitors | 3pcs 680uf 63V |
Dimension of VESC board | 60x40mm |
Power wire | Silicon wire |
Connectors | 5.5mm Golden Connectors |
Application: Electric skateboard, Esk8, longboard, mountainboard, offroad skateboard, city skateboard, street skateboard, motorized skateboard, electric longboard, electric surfboard, Esurf, Efoil, electric foil, foilsurf, foilsurfing, surffoil, surfjet, jetski, jetboard, electric hydrofoil, etc.,,
ROV/ROVEEE/remote
operated vehicle, underwater robot, Underwater Robotics/underwater remotely operated vehicles, subsea robots,cablecam, broadcast, IBC2019, Ultra drones,security monitoring robots,robots for security and safety monitoring in harsh terrain, agile robots, autonomous agile robots, security robots, autonomously monitor security, combat robots, fighting robots, etc.,
Maytech VESC Advantages:
- The 5.5mm golden connectors are soldered on the VESCs. It costs extra expense and also extra soldering processing method.
- Maytech VESCs come with 3pcs pf 680uf 63V capacitors which are soldered on the capacitor PCB. The capacitors are very important for every ESC. They can make sure the ESCs’stability when the ESCs speed up or slow down.
Why do we solder the capacitors on the capacitor PCB?
a)The capacitor PCB can stabilize the 3pcs 680uf 63V capacitors better than those are attached on the cables.
b)The capacitor PCB make the VESC look good and clean.
3. Maytech VESCs come with the USB cables and the sensor cables.
The USB cables are used for programming.
The sensor cables are used for the sensored motors when the original sensor cables on the motors are not compatible with the VESCs.
- Maytech uses the genuine Mosfets which come with circles and unclear writing.
However, the substituted Mosfets are with the clear writing and no circles. Many suppliers use the substituted Mosfets because of the lower cost.