(Motor+ESC+Remote) E-mountainboard electric skateboard kit MTSVESC7.12 Supercase200A VESC75 based ESC and brushless black sealed motor (battle-hardened) and Remote
(Motor+ESC+Remote) E-mountainboard electric skateboard kit MTSVESC7.12 Supercase200A VESC75 based ESC and brushless black sealed motor (battle-hardened) and Remote
SKU:MTSVESC7.12 with case+MTO6355-170-HA-C+MTSKR20WFV2
Precio habitual
$500.00
Precio habitual
$625.00
Precio de oferta
$500.00
Precio unitario
por
Los gastos de envío se calculan en la pantalla de pago.
No se pudo cargar la disponibilidad de retiro
Have Doubts? Contact US!!
Have Doubts? Contact US!!
(Motor+ESC+Remote) E-mountainboard electric skateboard kit MTSVESC7.12 Supercase200A VESC6 VESC75 based ESC and brushless black sealed motor (battle-hardened) and Remote
Price includes 1pcs ESC and 1pcs motor and 1pcs Remote
1. Specifications of MTSVESC7.12 200A Supercase ESC based on VESC6 speed controller:
|
Model no
|
MTSVESC7.12 Supercase200A
|
Cont. Current
|
200A
|
|
Voltage
|
3-12S
|
Burst Current
|
300A
|
|
BEC
|
5V
|
PCB size
|
92*52*22 mm
|
|
Hardware
|
based on VESC75300
|
Firmware version
|
updatable
|
|
PCB net weight
|
160g
|
Aluminium Case
|
98.5*55.5*35mm
|
|
Feature
|
12pcs mosfets; 8-layer PCB; separate high current components and low-curent components to two PCBs
|
||
First Generation Maytech sealed cover HALL SENSOR Motor
| Model No. | MTO6355-170-HA-C | MTO6365-170-HA-C | MTO6374-170-HA-C | MTO8085-160-HA-C |
| KV | 170 | 170 | 170 | 160 |
| Idle Current | 1.0A | 0.8A | 0.8A | 1.5A |
| Max. Current | 65A | 65A | 65A | 90A |
| Input Volt | 2-12s Lipo | 2-12s Lipo | 2-12s Lipo | 6-14s Lipo |
| Max. Output Watt | 3510W | 3520W | 3550W | 5330W |
| Max. Pull | 12000g | 9700g | 13000g | 15500g |
| Rated Current | 55A | 60A | 60A | 64A |
| Motor Weight | 605g | 760g | 830g | 1115g |
| Shaft | 8mm | 8mm | 8mm | 12mm |
| Output shaft length | 26mm | 26mm | 26mm | 44mm |
| Resistance | 0.0441 | 0.0402 | 0.0402 | 0.0280 |
| Model No. | MTO6355-170-HA-C2 | MTO6365-170-HA-C2 | MTO6374-170-HA-C2 |
| KV | 170 | 170 | 170 |
| Idle Current | 1.0A | 0.8A | 0.8A |
| Max. Current | 65A | 65A | 65A |
| Input Volt | 2-12s Lipo | 2-12s Lipo | 2-12s Lipo |
| Max. Output Watt | 3510W | 3520W | 3550W |
| Max. Pull | 12000g | 9700g | 13000g |
| Rated Current | 55A | 60A | 60A |
| Motor Weight | 610g | 765g | 860g |
| Shaft | 10mm | 10mm | 10mm |
| Output shaft length | 34mm | 34mm | 34mm |
| Resistance | 0.0441 | 0.0402 | 0.0402 |
| Model No. | MTO6880-190-HA-C3 | MTO6396-190-HA-C3 |
| KV | 190 | 190 |
| Idle Current | 0.8A | 2A |
| Max. Current | 65A | 80A |
| Input Volt | 2-12S Lipo | 2-12S Lipo |
| Max. Output Watt | 3550W | 4550W |
| Max. Pull | 13000g | 13500g |
| Rated Current | 60A | 65A |
| Motor Weight | 1200g | 1280g |
| Shaft | 10mm | 10mm |
| Output shaft length | 45.5mm | 34mm |
| Resistance | 0.0402 | 0.0200 |
| Model No. | MTSKR2005WF (MTSKR20WFV2) | Waterproof Rank | IP66 |
| Control Mode | New Esk8 | Application | Only for Electric skateboard, elongboard, mountainboard |
| Speed Display | Yes | Travel Mileage | Yes |
| Throttle and brake Display | ±100% | VESC Control Mode | Duty Cycle/ Current Mode |
| Speed Mode |
3 speed modes, each mode can adjust speed from 1%-100% throttle |
Accessories | Wireless charging pad; receiver; 3pcs dupont cable |
| Charger |
QC 2.0 wireless |
Wireless Frequency | 2.4GHz wireless with 40 channels |
| Display Screen |
OLED yellow & blue screen |
Triggers | 2x high senstive triggers |
| Throttle and Brake Signal Output Range |
1.5ms-2ms for throttle; 1.5ms-1ms for brake |
Telemeter Data by Receiver | Motor RPM; main battery voltage |
| Voltage Display |
Remote & main battery voltage level (lithium iron; lithium ion battery optional) |
Telemeter Data by VESC | ESC voltage/ current/ temp; Motor temp/ RPM |
| Compatible ESCs |
VESCTOOL/ Focbox/ Other PWM ESCs that has same signal output range with the remote |
Receiver Built-in Switch for Esk8 Light / Esurf Water Pump |
1x 30V 3A mechanical relay switch; 1x 20V 2A transistor electronic switch |
MTSPF7.12K Port definations:
- USB port for programming;
- LED Port for connecting customer’s LED light to show ESC is on or off;
- Sensor port for motor Hall sensors (ABI, HALL, magnetic precision encoders);
- CAN Port for CAN communication with other devices and VESC arrays;
- COMM port for various kinds of other communication methods like I2C, ADC, Uart,You can use your Arduino or Raspberry Pi to control the VESC!
- PPM port to connect PPM transceivers.
