In Stock! Maytech Hot Combo 6355 brushless motor +Vedder VESC for electric skateboard
In Stock! Maytech Hot Combo 6355 brushless motor +Vedder VESC for electric skateboard
SKU:MTO6355-190-HA+MTVESC50A
Verfügbarkeit für Abholungen konnte nicht geladen werden
Have Doubts? Contact US!!
Have Doubts? Contact US!!
1. Motor specification
a) Water-proof electric skateboards brushless motor 6355 170KV with hall sensor and closed cover.| Model NO | MTO6355-170-HA-C |
| Motor KV | 170(RPM/V) |
| Shaft | 8mm |
| Idle Curren | 1.0A |
| Max. Current | 65A |
| Input Volt | 2-12Lipo cell |
| Max. Output Watt | 3510W |
| Max. Pull | 12000g |
| Net Weight | 522g |
| Motor Diameter | 63mm |
| Internal Resistance | 0.0441 |
| Hall Sensor | with hall sensor |
| Feature |
with dustproof and waterproof function |
b) 6355 brushless motor with hall sensor specification
| Model NO | MTO6355-190-HA/MTO6355-200-HA/MTO6355-230-HA |
| Motor KV | 190/200/230(RPM/V) |
| Shaft | 8mm |
| Idle Curren | 1.0A |
| Max. Current | 65A |
| Input Volt | 2-12Lipo cell |
| Max. Output Watt | 3510W |
| Max. Pull | 12000g |
| Net Weight | 522g |
| Motor Diameter | 63mm |
| Internal Resistance | 0.0441 |
| Hall Sensor |
with hall sensor |
c) 6355 190KV brushless motor without hall sensor specification
| Model NO | MTO6355-190-G |
| Motor KV | 190(RPM/V) |
| Shaft | 8mm |
| Idle Curren | 1.0A |
| Max. Current | 65A |
| Input Volt | 2-12Lipo cell |
| Max. Output Watt | 3510W |
| Max. Pull | 12000g |
| Net Weight | 522g |
| Motor Diameter | 63mm |
| Internal Resistance | 0.0441 |
| Hall Sensor |
sensorless |
2. VESC Specification
| Application | e-skateboard/E-bike |
| BEC | 5V BEC |
| Lipo | 3-12Cells |
| Voltage | 8V-60V |
| Accessory | with USB cable |
| Package | W/ Box |
| Capacitors | 3pcs 680uf 63V |
| Dimension of VESC board | 60x40mm |
| Power wire | Silicon wire |
| Connectors | 5.5mm Golden Connectors |
Maytech VESC Advantages:
- The 5.5mm golden connectors are soldered on the VESCs. It costs extra expense and also extra soldering processing method.
- Maytech VESCs come with 3pcs pf 680uf 63V capacitors which are soldered on the capacitor PCB. The capacitors are very important for every ESC. They can make sure the ESCs’stability when the ESCs speed up or slow down.
Why do we solder the capacitors on the capacitor PCB?
a)The capacitor PCB can stabilize the 3pcs 680uf 63V capacitors better than those are attached on the cables.
b)The capacitor PCB make the VESC look good and clean.
3. Maytech VESCs come with the USB cables and the sensor cables.
The USB cables are used for programming.
The sensor cables are used for the sensored motors when the original sensor cables on the motors are not compatible with the VESCs.
- Maytech uses the genuine Mosfets which come with circles and unclear writing.
However, the substituted Mosfets are with the clear writing and no circles. Many suppliers use the substituted Mosfets because of the lower cost.
