In Stock! Maytech Hot Combo 5065 motor+Vedder VESC for electric skateboard
In Stock! Maytech Hot Combo 5065 motor+Vedder VESC for electric skateboard
SKU:MTO5065-220-HA+MTVESC50A
Verfügbarkeit für Abholungen konnte nicht geladen werden
Have Doubts? Contact US!!
Have Doubts? Contact US!!
1.Motor specifications:
a)Maytech 5065 220KV motor with no hall sensor
| Model NO | MTO5065-220-G |
| Motor KV | 220(RPM/V) |
| Shaft | 6mm |
| Idle Curren | 1.2A |
| Max. Current | 50A |
| Input Volt | 2-10Lipo cell |
| Max. Output Watt | 1815W |
| Max. Pull | 6700g |
| Net Weight | 364g |
| Rated Current | 42.5A |
| Internal Resistance | 0.0361 |
| Features |
Without hall sensor |
b) Maytech 5065 170kv motor with sealed cover:
| Model NO | MTO5065-170-HA-C |
| Motor KV | 170(RPM/V) |
| Shaft | 6mm |
| Idle Curren | 1.2A |
| Max. Current | 50A |
| Input Volt | 2-10Lipo cell |
| Max. Output Watt | 1815W |
| Max. Pull | 6700g |
| Net Weight | 364g |
| Rated Current | 42.5A |
| Internal Resistance | 0.0361 |
| Hall Senser |
With hall sensor |
c) Maytech sensored motor 5065 220/270kv electric engine：
| Model NO | MTO5065-220-HA/MTO5065-270-HA |
| Motor KV | 220(RPM/V)/270(RPM) |
| Shaft | 8mm |
| Idle Curren | 1.2A |
| Max. Current | 50A |
| Input Volt | 2-10Lipo cell |
| Max. Output Watt | 1815W |
| Max. Pull | 6700g |
| Net Weight | 364g |
| Rated Current | 42.5A |
| Internal Resistance | 0.0361 |
| Hall Sensor |
With hall sensor |
| Application | For electric skateboard/e-bike/marine robots |
Features:
- The up and bottom caps are made of aluminium alloy.
- The motor case is made of steel.
- The static balance is confirm.
- NSK Japanese bearings
- 45h sintered ndfeb magnets
- Stator is stacked with silicon steel
- Use high temperature and oxygen-free copper wire
- Stainless steel shaft
- High-temperature micro ball-bearing
2. VESC Specification
| Application | e-skateboard/E-bike |
| BEC | 5V BEC |
| Lipo | 3-12Cells |
| Voltage | 8V-60V |
| Accessory | with USB cable |
| Package | W/ Box |
| Capacitors | 3pcs 680uf 63V |
| Dimension of VESC board | 60x40mm |
| Power wire | Silicon wire |
| Connectors | 5.5mm Golden Connectors |
Maytech VESC Advantages:
- The 5.5mm golden connectors are soldered on the VESCs. It costs extra expense and also extra soldering processing method.
- Maytech VESCs come with 3pcs pf 680uf 63V capacitors which are soldered on the capacitor PCB. The capacitors are very important for every ESC. They can make sure the ESCs’stability when the ESCs speed up or slow down.
Why do we solder the capacitors on the capacitor PCB?
a)The capacitor PCB can stabilize the 3pcs 680uf 63V capacitors better than those are attached on the cables.
b)The capacitor PCB make the VESC look good and clean.
3. Maytech VESCs come with the USB cables and the sensor cables.
The USB cables are used for programming.
The sensor cables are used for the sensored motors when the original sensor cables on the motors are not compatible with the VESCs.
- Maytech uses the genuine Mosfets which come with circles and unclear writing.
However, the substituted Mosfets are with the clear writing and no circles. Many suppliers use the substituted Mosfets because of the lower cost.
