News — Products

(Pre-order) Maytech MTSKR2005WF V2 ESK8 Screen Remote for DIY skateboard Compatible with VESC FOCBOX Pre-order Discount Price: US$65.9/set. Shipping will be arranged on about 15-20 July, 2020. MTSKR1905WF Esurf/Esk8 VS MTSKR2005WF V2 ESK8 :

The burned chip in the picture is DRV8302, which is used for MOSFET drive. This chip is the most vulnerable component of VESC, accounting for 80% of the VESC failure rate. VESC6 firmware has been improved but still cannot be avoided 100%. This phenomenon is caused by the following reasons: The load of the motor is too high, or the rotor is blocked instantly. The motor speed is too fast. The skateboard brake is too strong. Details: When the load is too heavy: The driver chip receives the MCU control command, outputs a high voltage to drive the MOSFETto perform...

1.  Electric Switch Function The ESC has a port for electric switch (Price doesn't include the switch button). You can connect your own switch button to the port " ON/OFF,  LED(5V), GND".  If connect ON/OFF pin and GND pin, the ESC is off; disconnect them, the ESC is on. 2. Built-in Anti-Spark circuit.  The video compares MTVESC6.12 with Anti-Spark circuit to the MTSVESC6.0 without anti-spark circuit Tips: For ESCs without anti-spark circuit, recommend to you use anti-spark switch:

Hot selling combos: Electric Skateboard dual motor kit 1. Dual motor truck kit + dual 5065 170KV sealed motor with hall sensor: Original: US$264.8/set. After discount (coupon code sale25), US$239.8/set. 2. Dual motor truck kit + dual 6355 170KV sealed motor with hall sensor:  Original: US$280.4/set. After discount (coupon code sale25), US$255.4/set.   3. Dual motor truck kit + dual 6365 170KV sealed motor with hall sensor:  Original: US$282.4/set. After discount (coupon code sale25), US$257.4/set. 4. Dual motor truck kit + dual 6374 170KV sealed motor with hall sensor:  Original: US$311.8/set. After discount (coupon code sale25), US$286.8/set. 5. Recommmend suitable...

Attention Please: If you want to program on progcard, do not connect progcard to computer, otherwise it will use computer for programming, not on progcard. Progcard Port Definition: 1. Compatible ESC: MTSF300A-OPTO, MTSF300A-OPTO-WP 2. ESC has two three pins cables. lease do not mix , longer one is PWM throttle signal cable, short one is programmable cable, see below pictures 2.1 MTSF300A-OPTO 2.2 MTSF300A-OPTO-WP internal receiver programmable cable   2.3 MTSF300A-OPTO-WP external receiver programmable cable   3. How to connect progcard on ESC and program? You need to give extra 5V power to the programmable cable, otherwise progcard screen will...