Double kingpin truck Dual 6374 sensored motors Superfoc 50A VESC6 based ESC Remote electric skateboard longboard kit

MTSKT310DB+2xMTSKPS2005+2xSUPERFOC6.8+Canbus cable +2xMTO6374-170-HA-C+MTSKR1712
  • $885.29
  • Save $221.32

Notice before order: This kit SUPERFOC6.8 ESC is out of stock now because of chip shortage. Recommend to order following similar VESC based ESCs: 

1. In Stock! Maytech MTVESC50A 50A SuperESC based on VESC4.12 speed controller Bejamin Vedder VESC

2. In Stock! Maytech High Voltage 75V 50A 100A VESC7.5 based controller MTSVESC7.5R


Double kingpin truck Dual 6374 sensored motors Superfoc 50A VESC6 based ESC Remote electric skateboard longboard kit

Including: MTSKT310DB+2xMTSKPS1612+2xSUPERFOC6.8+Canbus cable +2xMTO6374-170-HA-C+MTSKR1712

1. Specifications of dual belt driven electric skateboard truck MTSKT310DB for electric longboard (1Set):

Dual‐belt‐driven Skateboard double kingpin Truck
Rear and Front trucks with two motor mounts
Truck size: 12inch

Frame materials: 356‐T6 alloy aluminum alloy
weight: 760g/pcs for back truck, 700g/pcs for front truck
Suitable for 5055/5065/6355/6365/6374 motors

New Gravity Casting Technology:
1. Aluminum liquid flow into truck mould by liquid's weight naturally, this way can delete mould's inside air clearly.
2. do heat treatment after demoulding (truck surface is a little rough because of heat treatment). Prouction time is longer than old die casting technology, and the production cost is twice than before.
3.  Hardness reached out HRB65 around, which can stand over 150kg weight for professional skateboarders.

2. Specifications of MTSKPS1612 Pulley and belt combos (2Sets)

2x17mm wide nylon wheel pulley
2x16mm wide steel wheel pulley
2x15mm wide belt

3. Specifications of MTO6374-170-HA-C 6374 170KV sealed cover motor (2pcs)

Model NO MTO6374-170-HA-C
Motor KV 170(RPM/V)
Shaft 8mm
Idle Current 0.8A
Max. Current 65A
Input Volt 2-12Lipo cell
Max. Output Watt 3550W
Max. Pull 13000g
Net Weight 830g
Motor Diameter 63mm
Internal Resistance 0.0402
Features sensored
Application For electric skateboard/e-bike
Features Waterproof and dustproof

4. Specifications of Superfoc6.8 50A (2pcs)(with 1pcs canbus cable)

Model No
MTSUPERFOC6.8 Cont Current 50A
Lipo Voltage 3-12S
Burst Current
BEC 5V PCB Size 40mm*60mm
Capatitor 3pcs 680uf63V MOS IRF7530
Hardware Based on VESC6.0 Firmware Updatable

5. Specification of new MTSKR1712 Remote controller with receiver (1pcs)
Model NO MTSKR1712
Battery Re-chargeable 300mAh 3.7V
Channals  80
Application for Skateboard
Accessory With the receiver
Certificate CE ROHS
Materials Plastic
Color Black
Feature small & light & easy to handle



We Also Recommend