Maytech New 200A MTVESC6.12 SUPERCASE200A VESC75 based controller for Robotics Efoil Electric Surfboard e-Skateboard electric motocycle e-bike heavy weight lifting drones argriculture drones, etc

Updated 200A ESC Based on VESC75300!! MTSVESC7.12

For more Specifications: 

https://michobby.com/collections/vesc-based-controllers/products/maytech-new-200a-mtvesc6-12-based-speed-controller-vedder-benjamin-vesc-for-electric-skateboard-mountainbaord

Features:

  • High voltage: If use current mode, without brake, max voltage is 60V; If use current mode with brake or duty cycle mode, max voltage is 12S lipo (Max 50.4V).
  • High current: 200A
  • Compatible with brushed and brushless motors, intrunner and outrunner motors
  • Sensored or Sensorless operation + Hybrid mode
  • Adjustable Forward/Backward/Brake
  • Regenerative Braking Function
  • Configurable RPM, Current, Voltage and Power limits
  • Support PPM, Analog (ADC), UART, Canbus input
  • Support BLDC square wave mode control and FOC sine wave mode
  • Communication ports: USB, CAN, UART
  • Throttle curve and ramping for all input sources
  • Seamless 4-quadrant operation
  • Motor Revolution, Amp Hour, Watt Hour counting
  • Real time data analysis and read out via communication ports
  • Adjustable protection against:
    1. Max and Minimum Input(Battery) Voltage
    2. Max Motor Current and Input(Battery) Current limits
    3. Max ERPM(RPM) (separate limits for each direction)
    4. Max Power (Wattage)
    5. Max Motor and ESC Temperature
    6. Max Regenerative Braking Current (separate limits for the motor and the input)

Port definations:

  1. USB port for programming;
  2. LED Port for connecting customer’s LED light to show ESC is on or off;
  3. Sensor port for motor Hall sensors (ABI, HALL, magnetic precision encoders);
  4. CAN Port for CAN communication with other devices and VESC arrays;
  5. COMM port for various kinds of other communication methods like I2C, ADC, Uart,You can use your Arduino or Raspberry Pi to control the VESC!
  6. PPM port to connect PPM transceivers.
Maytech New 200A MTVESC6.12 SUPERCASE200A VESC75 based controller for Robotics Efoil Electric Surfboard e-Skateboard electric motocycle e-bike heavy weight lifting drones argriculture drones, etc

Main Components and Advantages

  • High voltage 12S, High curent 200A, tiny size and compact design, light weight.
  • SuperiorSafety: With over-current protection, over-voltage protection, over-heat protection.
  • 2pcs PCBs to separatehigh and low power components (more stable and reliable).
  • 8-layer 3oz PCB Board, 3.4mmthick, supports high current and has efficient heat-dissipation capability. (Other brand PCB is only 1-2mm thick).
  • 12pcs American brand Fairchildhigh quality Mosfets, greater efficiency, handle higher current.
  • ARM 32bit processor, faster data transfer and storage.
  • 3pcs Japanese Rubycon Capacitors 63V 820μf,prevent power circuit impact.
  • 3pcs Current sampling chips from American TI Company. It can make the current sampling faster and more accurate, and has a good improvement on the FOC and over-current protection functions.
  • 6061 Premium Alu-Alloy Case,Quick heat-dissipation, Sleek aluminum finish, comfortable hand-feeling.
  • Removable cooling fan, 20W high power for quick cooling.Ensure reliable performance with excellent temperature control technology. (Notice: Fan and DC-DC module are not assembled. Please buy separately.)
  • USB Type C port- easy to connect and program settings.
  • Firmware standard: VESCTOOL automatically recognizes this ESC as 7.5_300. This firmware can be used.

Maytech New 200A MTVESC6.12 SUPERCASE200A VESC75 based controller for Robotics Efoil Electric Surfboard e-Skateboard electric motocycle e-bike heavy weight lifting drones argriculture drones, etc

Torna al blog

Lascia un commento

Si prega di notare che, prima di essere pubblicati, i commenti devono essere approvati.