New updated 6880 motor features VS old version:
-
New version is with embedded hall sensor to stator:
Hall sensor board is more stable and motor has more precise positioning and more smooth starup.
-
With changing the hall sensor position, inside space is bigger than before and the original small bearing inside the stator can be replaced with a larger model, which increases the lifetime of the motor.
- Mounting holes are updated to 8x M4 with deeper thread 11mm. Motor installation will be firmer.
New drawing with updated embeded hall sensor:
Other Features:
- The motors are suitable for the electric skateboards or electric bikes or robots.
- With big bearing sitting between stator and rotor for more stability
- The up and bottom caps are made of aluminium alloy.
- The motor case is made of steel.
- The static balance is confirm.
- NMB Japanese bearings
- 45h sintered ndfeb magnets
- Stator is stacked with silicon steel
- Use high temperature and oxygen-free copper wire
- Stainless steel shaft
- High-temperature micro ball-bearing
