Skip to product information
1 of 7

In Stock! Maytech New 200A 70V ESC MTSPF7.12K SUPERCASE200A V75 VESC_TOOL Compatible controller

In Stock! Maytech New 200A 70V ESC MTSPF7.12K SUPERCASE200A V75 VESC_TOOL Compatible controller

SKU:MTSPF7.12K

Regular price $234.50
Regular price Sale price $234.50
Sale Sold out
Shipping calculated at checkout.
Select Option Here

Have Doubts? Contact US!!

Maytech New 200A MTSPF7.12K SUPERCASE200A V75 based controller for Robotics Efoil Electric Surfboard e-Skateboard electric motocycle e-bike heavy weight lifting drones argriculture drones, etc

Specifications: 

Model no
MTSPF7.12K Supercase200A
Motor Current Max
200A
Voltage
5-18S (max 75V) (If don't use brake, max voltage 75V, if use brake, max voltage is 50V. )
Absolute Maximum Current
250A
Weight 345g Battery Current Max 100A
BEC
5V
PCB size
92*52*22 mm
Hardware
based on VESC75
Firmware version
updatable by VESC_TOOL
Support
Sensorless and Sensored motors
Aluminium Case
98.5*56*35mm 
Feature
12pcs mosfets; 8-layer PCB; separate high current components and low-curent components to two PCBs; etc

Set current in VESC_TOOL:
Motor Current Max: ≤200A (According to your motor current);
Absolute Maximum Current: ≤250A (According to your motor current);
Battery Current Max: ≤100A (According to your battery discharge current).

Notice: 

  • Never connect one reclever to two or more V6/V75  based SUPERFOC ESCs or VESCs in an array!  Permanent damage may result from Y-PPM wiring. 

  • Only connect CAN L and CAN H ! GND pins and 5V should never be connected in a V6/V75 based SUPERFOC ESCs or VESC array.

Please click picture to check how to mount Fan and DC-DC module. 

How to mount cooling fan to VESC6.12

Application: Electric skateboard, Esk8, longboard, mountainboard, offroad skateboard, city skateboard, street skateboard, motorized skateboard, electric longboard, electric surfboard, Esurf, Efoil, electric foil, foilsurf, foilsurfing, surffoil, surfjet, jetski, jetboard, electric hydrofoil, etc.,, ROV/ROVEEE/remote operated vehicle, underwater robot, Underwater  Robotics, underwater remotely operated vehicles, subsea robots,cablecam, Ultra drones, security monitoring robots, robots for security and safety monitoring in harsh terrain, agile robots,  autonomous agile robots, security robots, autonomously monitor security, combat robots, fighting robots, etc.,

Features:

High voltage: If use current mode, without brake, max voltage is 75V; If use current mode with brake or duty cycle mode, max voltage is 12S lipo (Max 50.4V).

High current: 200A

Compatible with brushed and brushless motors, intrunner and outrunner motors

Sensored or Sensorless operation + Hybrid mode

Adjustable Forward/Backward/Brake

Regenerative Braking Function

Configurable RPM, Current, Voltage and Power limits

Support PPM, Analog (ADC), UART, Canbus input

Support BLDC square wave mode control and FOC sine wave mode

Communication ports: USB, CAN, UART

Throttle curve and ramping for all input sources

Seamless 4-quadrant operation

Motor Revolution, Amp Hour, Watt Hour counting

Real time data analysis and read out via communication ports

Adjustable protection against:

Max and Minimum Input(Battery) Voltage

Max Motor Current and Input(Battery) Current limits

Max ERPM(RPM) (separate limits for each direction)

Max Power (Wattage)

Max Motor and ESC Temperature

Max Regenerative Braking Current (separate limits for the motor and the input)

Port definations:

  1. USB port for programming;
  2. LED Port for connecting customer’s LED light to show ESC is on or off;
  3. Sensor port for motor Hall sensors (ABI, HALL, magnetic precision encoders);
  4. CAN Port for CAN communication with other devices and VESC arrays;
  5. COMM port for various kinds of other communication methods like I2C, ADC, Uart,You can use your Arduino or Raspberry Pi to control the VESC!
  6. PPM port to connect PPM transceivers.

Notice: 

  • Never connect one reclever to two or more V6/V75  based SUPERFOC ESCs or VESCs in an array!  Permanent damage may result from Y-PPM wiring. 

  • Only connect CAN L and CAN H ! GND pins and 5V should never be connected in a V6/V75 based SUPERFOC ESCs or VESC array.

Maytech New 200A MTVESC6.12 SUPERCASE200A VESC6 based controller for Robotics Efoil Electric Surfboard e-Skateboard electric motocycle e-bike heavy weight lifting drones argriculture drones

Main Components and Advantages

  • High voltage 18S, High curent 200A, tiny size and compact design, light weight.
  • SuperiorSafety: With over-current protection, over-voltage protection, over-heat protection.
  • 2pcs PCBs to separatehigh and low power components (more stable and reliable).
  • 8-layer 3oz PCB Board, 3.4mmthick, supports high current and has efficient heat-dissipation capability. (Other brand PCB is only 1-2mm thick).
  • 12pcs high quality Mosfets, greater efficiency, handle higher current.
  • ARM 32bit processor, faster data transfer and storage.
  • 3pcs Capacitors, prevent power circuit impact.
  • 3pcs Current sampling chips. It can make the current sampling faster and more accurate, and has a good improvement on the FOC and over-current protection functions.
  • 6061 Premium Alu-Alloy Case,Quick heat-dissipation, Sleek aluminum finish, comfortable hand-feeling.
  • Removable cooling fan, 20W high power for quick cooling.Ensure reliable performance with excellent temperature control technology. (Notice: Fan and DC-DC module are not assembled. Please buy separately.)
  • USB Type C port- easy to connect and program settings.
  • Firmware standard: VESCTOOL automatically recognizes this ESC as 7.5_300. This firmware can be used.

Maytech New 200A MTVESC6.12 SUPERCASE200A VESC6 based controller for Robotics Efoil Electric Surfboard e-Skateboard electric motocycle e-bike heavy weight lifting drones argriculture drones


View full details