20%
(Motor+ESC+Remote) E-mountainboard electric skateboard kit MTSVESC7.12 Supercase200A VESC75 based ESC and brushless black sealed motor (battle-hardened) and Remote
MTSVESC7.12 with case+MTO6355-170-HA-C+MTSKR20WFV2(Motor+ESC+Remote) E-mountainboard electric skateboard kit MTSVESC7.12 Supercase200A VESC6 VESC75 based ESC and brushless black sealed motor (battle-hardened) and Remote
Price includes 1pcs ESC and 1pcs motor and 1pcs Remote
Please note all MTSVESC6.12 is updated to MTSVESC7.12 based on VESC75.
1. Specifications of MTSVESC7.12 200A Supercase ESC based on VESC6 speed controller:
|
Model no
|
MTSVESC7.12 Supercase200A
|
Cont. Current
|
200A
|
|
Voltage
|
3-12S
|
Burst Current
|
300A
|
|
BEC
|
5V
|
PCB size
|
92*52*22 mm
|
|
Hardware
|
based on VESC75300
|
Firmware version
|
updatable
|
|
PCB net weight
|
160g
|
Aluminium Case
|
98.5*55.5*35mm
|
|
Feature
|
12pcs mosfets; 8-layer PCB; separate high current components and low-curent components to two PCBs
|
||
2. Motor specifications
First Generation Maytech sealed cover HALL SENSOR Motor
| Model No. | MTO6355-170-HA-C | MTO6365-170-HA-C | MTO6374-170-HA-C | MTO8085-160-HA-C |
| KV | 170 | 170 | 170 | 160 |
| Idle Current | 1.0A | 0.8A | 0.8A | 1.5A |
| Max. Current | 65A | 65A | 65A | 90A |
| Input Volt | 2-12s Lipo | 2-12s Lipo | 2-12s Lipo | 6-14s Lipo |
| Max. Output Watt | 3510W | 3520W | 3550W | 5330W |
| Max. Pull | 12000g | 9700g | 13000g | 15500g |
| Rated Current | 55A | 60A | 60A | 64A |
| Motor Weight | 605g | 760g | 830g | 1115g |
| Shaft | 8mm | 8mm | 8mm | 12mm |
| Output shaft length | 26mm | 26mm | 26mm | 44mm |
| Resistance | 0.0441 | 0.0402 | 0.0402 | 0.0280 |
Second Generation Maytech sealed cover HALL SENSOR Motor
| Model No. | MTO6355-170-HA-C2 | MTO6365-170-HA-C2 | MTO6374-170-HA-C2 |
| KV | 170 | 170 | 170 |
| Idle Current | 1.0A | 0.8A | 0.8A |
| Max. Current | 65A | 65A | 65A |
| Input Volt | 2-12s Lipo | 2-12s Lipo | 2-12s Lipo |
| Max. Output Watt | 3510W | 3520W | 3550W |
| Max. Pull | 12000g | 9700g | 13000g |
| Rated Current | 55A | 60A | 60A |
| Motor Weight | 610g | 765g | 860g |
| Shaft | 10mm | 10mm | 10mm |
| Output shaft length | 34mm | 34mm | 34mm |
| Resistance | 0.0441 | 0.0402 | 0.0402 |
Third Generation Maytech sealed cover HALL SENSOR Motor with extra big bearing (more durable)
| Model No. | MTO6880-190-HA-C3 | MTO6396-190-HA-C3 |
| KV | 190 | 190 |
| Idle Current | 0.8A | 2A |
| Max. Current | 65A | 80A |
| Input Volt | 2-12S Lipo | 2-12S Lipo |
| Max. Output Watt | 3550W | 4550W |
| Max. Pull | 13000g | 13500g |
| Rated Current | 60A | 65A |
| Motor Weight | 1200g | 1280g |
| Shaft | 10mm | 10mm |
| Output shaft length | 45.5mm | 34mm |
| Resistance | 0.0402 | 0.0200 |
3. Electric skateboard longboard remote specifications:
Specification of MTSKR1712 Remote controller with receiver:
| Model NO | MTSKR1712 |
| Battery | Re-chargeable 300mAh 3.7V |
| Channals | 80 |
| Application | for Skateboard |
| Accessory | With the receiver |
| Certificate | CE ROHS |
| Materials | Plastic |
| Color | Black |
| Feature | small & light & easy to handle |
Specification of MTSKR20WFV2 waterproof Remote controller with screen and receiver:
MTSKR1905WF Esurf/Esk8 VS MTSKR20WFV2 ESK8 :
| MTSKR1905 V2 | MTSKR20WFV2 | ||
| Waterproof Class | IP67 double waterproof | IP66 | |
| Control mode | Esurf mode | Esk8 mode | NEW ESK8 mode |
| Throttle display | 0-100% | ±100% | ±100% |
| Speed mode | No | No |
Three speed modes; each mode with adjustable speed 1-100% |
| Cruise control | Yes | No | No |
| Speed display | No | Yes | Yes |
| Travel distance | No | Yes | Yes |
| Application: | Electric-surfboard/Efoil; Underwater control; |
E-skateboard | E-skateboard |
| Charger | QC 2.0 Wireless | ||
| Wireless frequency | 2.4GHz wireless with 40 Channel | ||
| Display screen | OLED Yellow and Blue screen | ||
| Voltage display | Remote and Main Battery Voltage Level（Lithium iron/lithium ion battery optional） | ||
| Triggers | 2 x High sensitivity triggers | ||
| Throttle output | PWM 1ms-2ms 100Hz | ||
| Telemeter Data by Recevicer | Motor RPM/Main Battery Voltage | ||
| Telemeter Data by VESC | ESC voltage/current/temperature/Motor temperature/RPM | ||
| Compatible ESCs | VESC4/VESC6/FOCBOX/Other PWM ESCs | ||
| VESC control mode | Duty Cycle / Current Mode | ||
| Receiver's built-in switches for esk8 lights, esurf water pump using, etc |
1 x 30V 3A mechanical relay switch | ||
| 1 x 20V 2A transistor electronics switch | |||
MTSVESC7.12 Port definations:
- USB port for programming;
- LED Port for connecting customer’s LED light to show ESC is on or off;
- Sensor port for motor Hall sensors (ABI, HALL, magnetic precision encoders);
- CAN Port for CAN communication with other devices and VESC arrays;
- COMM port for various kinds of other communication methods like I2C, ADC, Uart,You can use your Arduino or Raspberry Pi to control the VESC!
- PPM port to connect PPM transceivers.
MTSVESC7.12 Main Components and Advantages
- High voltage 12S, High curent 200A, tiny size and compact design, light weight.
- SuperiorSafety: With over-current protection, over-voltage protection, over-heat protection.
- 2pcs PCBs to separatehigh and low power components (more stable and reliable).
- 8-layer 3oz PCB Board, 3.4mmthick, supports high current and has efficient heat-dissipation capability. (Other brand PCB is only 1-2mm thick).
- 12pcs American brand Fairchildhigh quality Mosfets, greater efficiency, handle higher current.
- ARM 32bit processor, faster data transfer and storage.
- 3pcs Japanese Rubycon Capacitors 63V 820μf,prevent power circuit impact.
- 3pcs Current sampling chips from American TI Company. It can make the current sampling faster and more accurate, and has a good improvement on the FOC and over-current protection functions.
- 6061 Premium Alu-Alloy Case,Quick heat-dissipation, Sleek aluminum finish, comfortable hand-feeling.
- Removable cooling fan, 20W high power for quick cooling.Ensure reliable performance with excellent temperature control technology. (Notice: Fan and DC-DC module are not assembled. Please buy separately.)
- USB Type C port- easy to connect and program settings.
- Firmware standard: VESCTOOL automatically recognizes this ESC as 7.5_300. This firmware can be used.
English
French
German
Italian
Japanese
Korean
Russian
Spanish