Maytech 5065 170kv motor with black closed cover and 50A Vesc based controller for eskate

  • $329.78
  • Save $141.64


1.Motor specifications:

Maytech 5065 170kv BLDC motor with sealed cover:
Model NO MTO5065-170-HA-C
Motor KV 170(RPM/V)
Shaft 6mm
Idle Curren 1.2A
Max. Current 50A
Input Volt 2-10Lipo cell
Max. Output Watt 1815W
Max. Pull 6700g
Net Weight 364g
Rated Current 42.5A
Internal Resistance 0.0361
Hall Sensor

With hall sensor

 

Features:

  • The up and bottom caps are made of aluminium alloy.
  • The motor case is made of steel.
  • The static balance is confirm.
  • NSK Japanese bearings
  • 45h sintered ndfeb magnets
  • Stator is stacked with silicon steel
  • Use high temperature and oxygen-free copper wire
  • Stainless steel shaft
  • High-temperature micro ball-bearing

2. VESC Specification

Application e-skateboard/E-bike
BEC 5V BEC
Lipo 3-12Cells
Voltage 8V-60V
Accessory with USB cable
Package W/ Box
Capacitors 3pcs 680uf 63V
Dimension of VESC board 60x40mm
Power wire Silicon wire
Connectors 5.5mm Golden Connectors

Maytech VESC Advantages:

  1. The 5.5mm golden connectors are soldered on the VESCs. It costs extra expense and also extra soldering processing method.
  2. Maytech VESCs come with 3pcs pf 680uf 63V capacitors which are soldered on the capacitor PCB. The capacitors are very important for every ESC. They can make sure the ESCs’stability when the ESCs speed up or slow down.

Why do we solder the capacitors on the capacitor PCB?

a)The capacitor PCB can stabilize the 3pcs 680uf 63V capacitors better than those are attached on the cables.

b)The capacitor PCB make the VESC look good and clean.

       3. Maytech VESCs come with the USB cables and the sensor cables.

The USB cables are used for programming.

The sensor cables are used for the sensored motors when the original sensor cables on the motors are not compatible with the VESCs.

  1. Maytech uses the genuine Mosfets which come with circles and unclear writing.

However, the substituted Mosfets are with the clear writing and no circles. Many suppliers use the substituted Mosfets because of the lower cost.


We Also Recommend