News — Electric Skateboard

Updated 200A ESC Based on VESC75300!! MTSVESC7.12

Posted by Christina Zhang on

Updated 200A ESC Based on VESC75300!! MTSVESC7.12

For more Specifications:  https://michobby.com/collections/vesc-based-controllers/products/maytech-new-200a-mtvesc6-12-based-speed-controller-vedder-benjamin-vesc-for-electric-skateboard-mountainbaord Features: High voltage: If use current mode, without brake, max voltage is 60V; If use current mode with brake or duty cycle mode, max voltage is 12S lipo (Max 50.4V). High current: 200A Compatible with brushed and brushless motors, intrunner and outrunner motors Sensored or Sensorless operation + Hybrid mode Adjustable Forward/Backward/Brake Regenerative Braking Function Configurable RPM, Current, Voltage and Power limits Support PPM, Analog (ADC), UART, Canbus input Support BLDC square wave mode control and FOC sine wave mode Communication ports: USB, CAN, UART Throttle curve and ramping for all input sources Seamless 4-quadrant operation...

Read more →

How to use the Two Built-in Switches of MTSKR1905WF and MTSKR20WFV2 Remote?

Posted by Christina Zhang on

How to use the Two Built-in Switches of MTSKR1905WF and MTSKR20WFV2 Remote?

The Transistoer switch can be used for LED Light System.  The Relay switch can be used for LED Light System or Water Pump Motor System.  Maytech MTSKR1905WF V2 New Waterproof Remote Control for Esk8/Esurf Maytech MTSKR20WFV2 V2 Remote for Esk8 1. Transistor Switch (MOSFET Switch) -Connect the SWI switch, your LED light and 3S battery as following shows.   -When (Short press Function button three times) transistor switch is on (display of 【2】in Screen Main interface), transistor switch source will be connected to GND and turn on LED. When it’s off(no display of【2】in Screen Main interface), LED is off. 2. Relay Switch...

Read more →